Publicidad
Idiomas disponibles
Idiomas disponibles
en - Operating and installation instructions
Connect the relevant components to
connection b.
Secure the cable with the strain relief
provided.
Close and screw on the lid of the
control module.
If earthing cannot be ensured using
the fixing screws, connect the
earthing wire provided.
After all components have been
installed, carry out an electrical
safety check in accordance with
local regulations (e.g. VDE 0701-1 in
Germany).
14
Central extraction unit
The potential-free contact of the control
module can, for example, be used in
an EXT/EXTA model cooker hood that is
connected to a central extraction unit.
The contact can be used to actuate an
electrically operated shut-off valve ,
which is upstream of the central
extraction unit.
The shut-off valve must be suitable for
switching with a potential-free normally
open contact.
The fan power is dependent on the fan
used and the design of the extraction
system. The fan power is not controlled
via the cooker hood control elements.
The components in the central
extraction unit are not part of the Miele
delivery programme.
If in any doubt, ask your building
regulations inspector prior to
installation.
Publicidad
