Descargar Imprimir esta página

Garland CHOPPER 452 ZE Manual De Instrucciones página 22

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
English
INDEX
1. Introduction
2. Security measures
3. Warning symbols
4. Machine description
5. Start up instructions
6. Using the machine
7. Maintenance and service
8. Trouble shooting
9. Transport
10. Storage
11. Recycling or disposal of your machine
12. Warranty conditions
Declaration of conformity CE
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
Ref.:GCCCHOPPER452ZEV17M1217V1
DATE OF PUBLICATION: 29/12/2017
DATE OF REVISION:
29/12/2017
1. INTRODUCTION
22
Thank you for choosing this Garland machine. We
are confident that you will appreciate the quality and
23
performance of this machine, which will facilitate your
task for a long period of time. Remember that this
29
machine has the most extensive and expert technical
assistance network which you can consult for the
30
maintenance, troubleshooting and purchase of spare
parts or accessories.
32
Warning! Read all safety warnings and
34
all instructions. The failure to observe all
warnings and instructions below can result
35
in fire and/or serious injury. Before using this machine,
carefully read the information in this manual on
37
correct setup and safe techniques.
38
This machine is for domestic use and is designed
for cutting logs up to 35 cm in diameter (*) and a
38
maximum of 52 cm in length (*), with the ends cut
perpendicular to the axis of the trunk by shears due
38
to pressure generated by a hydraulic piston that
applies the blade to the trunk. Any other use could be
39
dangerous to you, people, animals and things that are
40
around and can damage the machine.
Only cut trunks that have the ends perpendicular to
the axis of the trunk. The ends of the logs to be cut
should be at a right angle.
Make sure there are no nails or foreign objects in the
trunks being cut. Foreign objects and nails may be
projected and cause major injury.
Do not cut logs that have branches. The branches
should be cut in flush with the trunk.
Do not use this machine to try to cut any other object
that is not a trunk. This machine and its safety devices
22/120

Publicidad

loading