Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLI-
ANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION :
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK) NO
USER SERVICEABLE PARTS INSIDE. REFER SER-
VICING TO QUALIFIED SERVICE PERSONNEL.
The important note is located on the rear of the cabinet.
IMPORTANT SAFEGUARDS
1. Read instructions-All the safety and operating instruc-
tions should be read before the appliance is operated.
2. Retain Instructions-The safety and operating instruc-
tions should be retained for future reference.
3. Heed Warnings-All warnings on the appliance and in
the operating instructions should be adhered to.
4. Follow Instructions-All operating and use instructions
should be followed.
5. Cleaning-Unplug TV from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol clean-
ers. Use a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninter-
rupted service and, that for some specific reason, such
as the possibility of the loss of an authorization code
for a CATV converter, is not intended to be unplugged
by the user for cleaning or any other purpose, may
exclude the reference to unplugging the appliance in
the cleaning description otherwise required in item 5.
6. Attachments-Do not use attachments not recommend-
ed by the TV manufacturer as they may cause hazards.
7. Water and Moisture-Do not use this TV near water,
for example, near a bath tub, wash bowl, kitchen sink,
or laundry tub, in a wet basement, or near a swim-
ming pool, and the like.
8. Accessories-Do not place this TV on an unstable cart,
stand, tripod, bracket, or table. The TV may fall, caus-
ing serious injury to someone, and serious damage to
the appliance. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer,
or sold with the TV.
Any mounting of the appliance should follow the man-
ufacturer's instructions and should
PORTABLE CART WARNING
use a mounting accessory recom-
mended by the manufacturer. An
appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance
and cart combination to overturn.
S3126A
OPERATING CONTROLS AND FUNCTIONS
- FRONT PANEL -
VIDEO
L - AUDIO - R
HEADPHONE
1
2
3
4
- REMOTE CONTROL -
GAME
SLEEP
POWER
8
DISPLAY
1
2
3
4
5
6
16
CHANNEL
RETURN
7
8
9
0
+100
INPUT
SELECT
7
CH
VOL
VOL
6
CH
MUTE
MENU
5
1. VIDEO (IN) jack- Connect to the video
output jack of a video camera or VCR.
2. AUDIO L (IN) jack- Connect to the left
channel audio output jack of a video cam-
era or VCR.
Note : The AUDIO L (IN) jack is for
mono input. The sound is heard from both
speakers. Use this jack for connecting
monaural audio equipment.
3. AUDIO R (IN) jack- Connect to the right
channel audio output jack of a video cam-
era or VCR.
THIS SYMBOL INDICATES THAT DAN-
GEROUS VOLTAGE CONSTITUTING A
RISK OF ELECTRIC SHOCK IS PRE-
SENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT
THERE ARE IMPORTANT OPERATING
AND MAINTENANCE INSTRUCTIONS
IN THE LITERATURE ACCOMPANYING
THE APPLIANCE.
AMEUBLES- Cet appareil ne doit être placé que sur
un meuble (avec ou sans roulettes) recommandé par le
fabricant. Si vous l'installez sur
un meuble à roulettes, déplacez
les deux ensembles avec précau-
tion. Un arrêt brusque, l'utilisa-
tion d'une force excessive et des
surfaces irrégulières risquent de
déstabiliser l'ensemble et de le
renverser.
9. Ventilation-Slots and openings in the cabinet and the
back or bottom are provided for ventilation and to
ensure reliable operation of the TV and to protect it
from overheating, these openings must not be
blocked or covered. The openings should never be
blocked by placing the TV on a bed, sofa, rug, or
other similar surface. This TV should never be placed
near or over a radiator or heat register. This TV should
not be placed in a built-in installation such as a book-
case or rack unless proper ventilation is provided or
the manufacturer's instructions have been adhered to .
10. Power Sources-This TV should be operated only from
the type of power source indicated on the marking
label. If you are not sure of the type of power supply
to your home, consult your appliance dealer or local
power company. For TVs intended to operate from
battery power, or other sources, refer to the operating
instructions.
11. Grounding or Polarization-This TV is equipped with a
polarized alternating-current line plug(a plug having
one blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety fea-
ture. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should still
fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of
the polarized plug.
MENU
VOLUME
CHANNEL
POWER
5
6
7
8
4. HEADPHONE jack- To connect head-
phone (not supplied) for personal listening.
5. MENU button- Press to display the menu
on the TV screen.
15
6. VOLUME (VOL) ▲/▼ buttons- Press to
14
control the volume level.
Press to determine the setting mode from
13
the menu on the TV screen (only the VOL
▲ button).
Press to select or adjust from a particular
12
menu (for example : Language Selection,
Channel Presetting, Closed Caption
Selection, Picture Adjustment, V-CHIP Set
11
Up).
7. CHANNEL (CH) ▲/▼ buttons- Press to
select memorized channel.
Press to select the setting mode from the
menu on the TV screen.
10
Press to select item you want to adjust in
the picture control mode.
8. POWER button- Press to turn the TV ON
and OFF.
9. Infrared Sensor Window- Receives the
infrared control signals from the remote
control unit.
10. MUTE button- Press to turn off the sound
portion of the TV program (Volume level
display turns LIGHT RED from LIGHT
BLUE). Press this button again or press the
VOL(ume) ▲ or ▼ button to restore sound.
11. INPUT SELECT button- Press to select
TV or the external input (VIDEO1 or
VIDEO2) mode (See USING AUDIO/
VIDEO INPUT JACKS).
12. CHANNEL RETURN button- Press to
go back to the previously viewed channel.
EXAMPLE OF ANTENNA GROUNDING AS PER
S 2 8 9 8 A
12. Power-Cord Protection-Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
SYMBOLE D'AVERTISSEMENT POUR
particular attention to cords at plugs, convenience
LES COMPOSANTES
APPAREIL ET MEUBLE A ROULETTES
receptacles, and the point where they exit from the
appliance.
13. Outdoor Antenna grounding-If an outside antenna or
cable system is connected to the TV, be sure the
antenna or cable system is grounded so as to provide
some protection against voltage surges and built-up
S3126A
static charges. Article 810 of the National Electrical
Code, ANSI/NFPA No. 70, provides information with
respect to proper grounding of the mast and support-
ing structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors,
location of antenna-discharge unit, connection to
grounding electrodes, and requirements for the
grounding electrode. (Fig. A)
14. Lightning-For added protection for this TV receiver
during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the TV due to
lightning and power-line surges.
15. Power Lines-An outside antenna system should not be
located in the vicinity of overhead power lines or
other electric light of power circuits, or where it can
fall into such power lines or circuits. When installing
an outside antenna system, extreme care should be
taken to keep from touching such power lines or cir-
cuits as contact with them might be fatal.
16. Overloading-Do not overload wall outlets and exten-
sion cords as this can result in a risk of fire or electric
shock.
17. Object and Liquid Entry-Never push objects of any
kind into this TV through openings as they may touch
dangerous voltage points or short out parts that could
result in a fire or electric shock. Never spill liquid of
any kind on the TV.
- REAR PANEL -
9
For example, pressing this button once
will change channel display from CH 3
(present channel) to CH 10 (previously
viewed channel), and pressing it a second
time will return from CH 10 to CH 3.
13. DISPLAY button- Press to display the
channel number on the screen. If you press
it again, the channel number will disappear.
14. SLEEP button- Press to display the sleep
timer and start the function. The shut off
time can be determined by the number of
times you press the button (0, 10, 20, 30,
..90, 0 minutes).
15. GAME button- Press to set Game mode
and external input mode at the same time.
Press the INPUT SELECT button to exit
this mode.
16. Channel number buttons- Press two dig-
its to directly access the desired channel.
Remember to press a "0" before a single
digit channel.
+100 button- Press to select cable chan-
nels higher than 99.
17. AC cord- Connect to a standard AC outlet
(120V/60Hz).
Note : Unwrap the AC cord completely
from the backcover before plugging the
cord into an AC outlet.
18. S-VIDEO input jack- Connect to the
S-VIDEO output jack of a video camera
or VCR using the S-VIDEO cable (not
supplied).
Note : The S-VIDEO jack is given priority
over the VIDEO jack on the rear panel.
19. ANT(enna). IN jack- Connect to an
antenna, cable system, or satellite system.
FIGURE A
NATIONAL ELECTRICAL CODE
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
NEC - NATIONAL ELECTRICAL CODE
18. Servicing-Do not attempt to service this TV yourself
as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing
to qualified service personnel.
19. Damage Requiring Service-Unplug this TV from the
wall outlet and refer servicing to qualified service per-
sonnel under the following conditions:
a. When the power supply cord or plug is damaged or
frayed.
b. If liquid has been spilled, or objects have fallen into
the TV.
c. If the TV has been exposed to rain or water.
d. If the TV does not operate normally by following the
operating instructions. Adjust only those controls that
are covered by the operating instructions, as improper
adjustment of other controls may result in damage and
will often require extensive work by a qualified tech-
nician to restore the TV to its normal operation.
e. If the TV has been dropped or damaged in any way.
f. When the TV exhibits a distinct change in perfor-
mance-this indicates a need for service.
20. Replacement Parts-When replacement parts are
required, be sure the service technician uses replace-
ment parts specified by the manufacturer that have the
same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, injury
to persons or other hazards.
21. Safety Check-Upon completion of any service or
repairs to this TV, ask the service technician to per-
form routine safety checks to determine that the TV is
in proper operating condition.
22. Heat-This TV product should be situated away from
heat sources such as radiators, heat registers, stoves,
or other products (including amplifiers) that produce
heat.
VIDEO
L
AUDIO
R
IN
17
1
2
3
INSTALLING THE BATTERIES
1) Slide the battery compartment cover back
on the remote unit.
2) Insert 2 "AA" penlight batteries into battery
compartment in the direction as indicated
by the polarity (+ / -) markings. Batteries
installed with incorrect polarity may dam-
age the remote unit.
3) Replace the cover.
USING AUDIO/VIDEO INPUT JACKS
When you use the AUDIO/VIDEO input
jacks, select "VIDEO1" or "VIDEO2" mode
by pressing the INPUT SELECT button on the
remote control.
• To use the jacks on the rear of the TV,
select "VIDEO1".
• To use the jacks on the front of the TV,
select "VIDEO2".
Notes :
• You may also set Game mode by pressing
the GAME button on the remote control.
"GAME" appears on the TV screen. In this
case, connect the external source to the
AUDIO/VIDEO jacks on the front panel (see
PICTURE ADJUSTMENT).
• When you use the S-VIDEO connection,
S-VIDEO jack is given priority over the
VIDEO jack on the rear panel.
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
ANT. IN
S-VIDEO
18
19
Publicidad
