Publicidad
Idiomas disponibles
Idiomas disponibles
L1356.QX33 01.5.14 5:06 PM Page 3
PREPARATION FOR USE
LANGUAGE SELECTION
If you want to change the language of the on-screen menu, follow the procedure below.
1
Connect the power cord to a standard AC outlet.
2
Press the POWER button to turn on the TV.
3
Press the MENU button so that the menu display appears
on the TV screen.
4
Press the CH(annel) L or M button to point to "[ENGLISH]".
5
Select "ENGLISH" or "ESPAÑOL" = Spanish by using
the VOL(ume) L or M button.
6
Press the MENU button to exit the menu.
CHANNEL PRESETTING
NOTE:You MUST PRESET channels BEFORE using CHANNEL L/M button.
To preset a channel or to change a preset channel, follow the procedure below.
1
Press the POWER button to turn on the TV.
2
Press the MENU button so that the menu display appears
on the TV screen.
3
Press the CH(annel) L or M button to point to "CHANNEL SET".
Then, press the VOL(ume) L button.
OPERATIONS
WATCHING A TV PROGRAM
1) Press the POWER button to turn on the TV.
2) Select the desired channel with the CH(annel) L or M button.
3) Adjust the volume to the desired listening level using the VOL(ume) L or M button.
4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)
SETTING THE SLEEP TIMER
The sleep timer function enables you to shut off the power without pressing
the POWER button after a desired time period.
1) Press the POWER button to turn on the TV and press the SLEEP button
on the remote control .
2) You may change the sleep time by pressing the SLEEP
button on the remote control repeatedly. The timer can be set up
to 90 minutes, 10 minutes each time the SLEEP button is
pushed. (The timer display counts up and sleep timer will
be displayed on the screen when you press the SLEEP
button on remote control.)
Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the
sleep time will be lost.
CLOSED CAPTION SELECTION
You may view specially labeled (cc) TV pro-
grams, movies, news, prerecorded tapes, etc.
with either a dialogue caption or text display
added to the program.
: Press the VOL(ume) L or M button.
PICTURE
PICTURE
CHANNEL SET
CHANNEL SET
[ENGLISH]ESPAÑOL
[ENGLISH]ESPAÑOL
V-CHIP SET UP
V-CHIP SET UP
CAPTION [OFF]
CAPTION [ C1]
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]
SLEEP 10
To cancel the sleep timer:
Press the SLEEP button repeatedly
until "SLEEP 0" is displayed.
1) Press the MENU button so that the menu
display appears on the TV screen.
2) Press the CH(annel) L or M button to point
to "CAPTION".
3) Press the VOL(ume) L or M button to select
the mode you wish.
4) When done, press the MENU button to exit
the menu.
PICTURE
PICTURE
PICTURE
CHANNEL SET
CHANNEL SET
CHANNEL SET
[ENGLISH]ESPAÑOL
[ENGLISH]ESPAÑOL
[ENGLISH]ESPAÑOL
V-CHIP SET UP
V-CHIP SET UP
V-CHIP SET UP
CAPTION [ C2]
CAPTION [ T1]
CAPTION [ T2]
4
Press the CH(annel) L or M button to point to "AUTO MEMO".
Then, press the VOL(ume) L button.
The tuner scans and memorizes all active channels in
your area.
G
The TV distinguishes between standard TV channels
and cable (CATV) channels.
G
When AUTO MEMO action is completed, the lowest
memorized channel reappears on the screen.
When you press the CH(annel) L or M button after
G
selecting AUTO MEMO, the tuner will stop at the memorized
channels only.
G
The TV may detect TV channels as CATV channels
if the receiving conditions are poor. In this case, try AUTO MEMO action
again when receiving conditions are better.
[ADD/DELETE FUNCTION]
1) Press the MENU button so that the menu display appears on the TV
screen.
2) Press the CH(annel) L or M button to point to "CHANNEL SET".
Then, press the VOL(ume) L button.
3) Press the VOL(ume) L button so that "ADD/DELETE" is selected.
4) Use the CH(annel) L or M button to select the
channel you wish to put into memory or to erase from memory.
Note: The display will return to a normal screen in about 10 seconds.
Perform "ADD/DELETE" function while this display appears on the
screen.
Press the VOL(ume) L or M button to light up the channel number
G
in LIGHT BLUE if you wish to add the channel into memory.
Press the VOL(ume) L or M button to light up the channel number
G
in LIGHT RED if you wish to erase the channel from memory.
5) Press the MENU button to exit the menu.
RESUME FUNCTION
If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical-
ly when the power resumes.
PICTURE ADJUSTMENT
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the VOL(ume) L button so that "PICTURE" is selected.
3) Select the feature you wish to adjust with the CH(annel) L or M button and adjust it with the
VOL(ume) L or M button.
GAME MODE
Set to the most suitable position for TV
GAME.
[+] : ON
[-] : OFF
BRIGHT
Adjust until the whitest parts of the picture are
as bright as you prefer.
[+] : increase brightness
[-] : decrease brightness
CONTRAST
Adjust to increase or decrease contrast.
[+] : increase contrast
[-] : decrease contrast
COLOR
Adjust to be brilliant or pale color.
[+] : be brilliant color
[-] : be pale color
TINT
Adjust to obtain natural skin tones.
[+] : greenish tone
[-] : reddish tone
: Press the CH(annel) L or M button.
[-]
[+]
[-]
[+]
[-]
GAME MODE
BRIGHT
OFF
ON
ADD/DELETE
AUTO MEMO
PICTURE
CHANNEL SET
[ENGLISH]ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]
ADD/DELETE
AUTO MEMO
Notes:
G
In the above steps, the picture adjustment
display will disappear from the TV screen
automatically after about 10 seconds if you
do not press any buttons, even though you
may not be finished. Press the MENU and
VOL(ume) L button so that "PICTURE" is
selected. Then, press the CH(annel) L or M
button repeatedly until the display returns to
the screen.
G
If you adjust the other Picture control after
you set the Game mode to [ON], the Game
mode is set to [OFF] automatically.
[USING THE GAME BUTTON]
You may also set the Game mode and external
input mode at the same time by pressing the
GAME button on the remote control. "GAME"
appears on the TV screen.
G
To exit the Game mode and external input
mode, press the GAME button on the remote
control again.
G
To cancel the Game mode only, adjust the
picture control. In this case, "VIDEO" instead
of "GAME" appears on the TV screen.
G
If you press the GAME button when the TV
is off, the TV turns on and will be in the
Game mode and external input mode auto-
matically.
[+]
[-]
[+]
[-]
CONTRAST
COLOR
TINT
[+]
Publicidad
