Publicidad
Idiomas disponibles
Idiomas disponibles
V-CHIP SET UP
V-CHIP enables parents to prevent their chil-
dren from watching inappropriate material on
TV.
V-CHIP reads the ratings for programming
(except for news and sports programs, unedit-
ed movies on premium cable channels, and
Emergency Broadcast System signals), then
denies access to programming if the program's
rating meets or exceeds the limitations you
select. In this case, "PROTECTED PRO-
GRAM by ..." message appears on the TV
screen. You can watch the protected program
by entering access code (default 0000).
To block certain ratings, follow the steps
below.
Programming may be rated by the Motion
●
Picture Association of America (MPAA) or
according to the Television Parental
Guidelines. In order to block any inappro-
priate programming, set your limits in both
places (MPAA RATING and TV RATING).
You cannot access the menu when the
●
"PROTECTED PROGRAM by ..." message
appears. In this case, change to an
unblocked channel, then press the MENU
button.
[MPAA RATING SET UP]
1) Press the MENU button so that the menu
display appears on the TV screen.
2) Press the CH(annel) ▲
or ▼ button to point to
PICTURE
CHANNEL SET
[ENGLISH]
"V-CHIP SET UP".
B V-CHIP SET UP
Then, press the
CAPTION
VOL(ume) ▲ button.
3) Use the number buttons
to enter 4-digit access
ACCESS CODE
code. The default
- - - -
access code is 0000. If
you have not set up
your personal access
code, you should use
TV RATING
0000.
B MPAA RATING
4) Press the CH(annel) ▲
CHANGE CODE
or ▼ button to point to
"MPAA RATING".
Then, press the VOL(ume) ▲ button.
TROUBLESHOOTING GUIDE
Sometimes a performance problem can be easily solved by checking seemingly apparent but often over-
looked possibilities. Before arranging for service, check these items. It could save you time and money.
QUICK SERVICE CHECK LIST
POSSIBLE REMEDY
Try a new channel, if OK, then possible station trouble.
Is TV plugged in?
Power at outlet?
Is TV's POWER button on?
Is antenna connected to terminal on the back of the set?
If outside antenna is being used, check for broken wire.
Check for local interference.
Turn off with POWER button and then turn it on after about a minute.
Adjust COLOR control.
Adjust CONTRAST & BRIGHT control.
Check batteries in Remote Control.
Closed Caption Problem
My TV is showing captions that are
misspelled.
My TV will not show the text in its entirety
or there is a delay of what is being said.
My captions are scrambled with white
boxes on the TV screen.
My program guide listed a TV show as
being closed captioned
but none of the captions were displayed.
My prerecorded videotape does not show
any captions. The tape box mentions it
being closed captioned.
My TV screen shows a black box on certain
channels.
As an E
S
®
Partner, our company has determined that this product meets
NERGY
TAR
®
the E
S
guidelines for energy efficiency. E
NERGY
TAR
5) Press the CH(annel) ▲
or ▼ button to point to
your desired item.
Then, press the
VOL(ume) ▲ button to
select [BLOCK] or [VIEW].
<Selection>
<Rating Category
Explanations>
• G:
General Audience
• PG:
Parental Guidance suggested.
• PG-13:
Unsuitable for children under 13
• R:
Restricted; under 17 requires
accompanying
parent or adult guardian
• NC-17:
No one under 17 admitted
• X:
Mature audience only
When you select the rating category and
●
turn it to [BLOCK], the higher rating will
turn [BLOCK] automatically. Also, the
lower rating will turn [VIEW] automatically.
When you turn "G" to [BLOCK] or
●
[VIEW], the all ratings will turn to
[BLOCK] or [VIEW] automatically.
When you turn "X" to [VIEW], then all rat-
●
ings will turn to [VIEW] automatically.
6) Press the MENU button to exit the menu.
[TV RATING SET UP]
1) Press the MENU button so that the menu
display appears on the TV screen.
2) Press the CH(annel) ▲ or ▼ button to point
to "V-CHIP SET UP".
Then, press the VOL(ume) ▲ button.
3) Use the number buttons to enter 4-digit
access code. The default
ESPAÑOL
access code is 0000. If
you have not set up your
[OFF]
personal access code,
you should use 0000.
4) Press the CH(annel) ▲
or ▼ button to point to
"TV RATING". Then,
press the VOL(ume) ▲
button.
5) Press the CH(annel) ▲
or ▼ button to point to
your desired item.
Then, press the
VOL(ume) ▲ button to
select [BLOCK] or [VIEW].
Possible Remedy
You are watching a live broadcast and spelling errors made by the
closed captioning production company may pass through uncorrect-
ed. A prerecorded program will not show any misspelled words
because of the normal time available for editing the captions.
Captions that are delayed a few seconds behind the actual dialogue
are common for live broadcasts. Most captioning production compa-
nies can display a dialogue to a maximum of 220 words per minute.
If a dialogue exceeds that rate, selective editing is used to insure that
the captions remain up-to-date with the current TV screen dialogue.
Interference caused by building, power lines, thunderstorms, etc.
may cause scrambled or incomplete captions to appear.
Broadcasters may at times use a time compression process to the
actual program so that additional advertising time can be given.
Since the decoder cannot read the compressed information, captions
will be lost.
The videotape was either an illegal copying or the tape duplicating
company accidentally left out the captioning signals during the
copying process.
You are in the TEXT mode. Select CAPTION mode or CAPTION
[OFF].
®
S
is a U.S. registered mark.
NERGY
TAR
<Selection>
B G
[VIEW]
Explanations>
PG
[VIEW]
• TV-Y:
PG-13
[VIEW]
R
[VIEW]
• TV-Y7:
NC-17
[VIEW]
X
[VIEW]
• TV-G:
• TV-PG:
• TV-14:
• TV-MA:
When you select the rating category and turn
●
it to [BLOCK], the higher rating will turn
[BLOCK] automatically. Also, the lower rat-
ing will turn [VIEW] automatically.
When you turn "TV-Y" to [BLOCK] or
●
[VIEW], then all ratings will turn to
[BLOCK] or [VIEW] automatically.
When you turn "TV-MA" to [VIEW], then
●
all ratings will turn to [VIEW] automatically.
When you select TV-Y7, TV-PG, TV-14, or TV-
MA and you press the VOL(ume) ▲ button, the
sub-ratings will appear on the TV screen.
If you select the rating category (example: TV-
PG) and turn it to [BLOCK] or [VIEW], the
sub-ratings (example: V for Violence) will turn
[BLOCK] or [VIEW] automatically.
You can set the sub-ratings to [BLOCK] or
[VIEW] individually when the rating category
is set to [BLOCK]. To set the sub-ratings indi-
vidually, follow the steps below.
When you select [TV-Y7]:
●
Press the CH(annel) ▲
or ▼ button to select
"FV" (Fantasy
Violence). Then, press
the VOL(ume) ▲ but-
ton to select [BLOCK]
or [VIEW].
ACCESS CODE
When you select [TV-PG], [TV-14] or [TV-
●
- - - -
MA]:
Press the CH(annel) ▲
or ▼ button to select
"D" (Suggestive
B TV RATING
Dialog), "L"(Coarse
MPAA RATING
CHANGE CODE
Language), "S"(Sexual
Situation), or "V"
(Violence). Then, press
the VOL(ume) ▲ but-
ton to select [BLOCK]
B TV-Y
[VIEW]
TV-Y7(
) [VIEW]
or [VIEW].
TV-G
[VIEW]
Note: When you select
TV-PG(
) [VIEW]
TV-14(
)
[VIEW]
[TV-MA], "D" does not
TV-MA(
) [VIEW]
appear on the TV screen.
MAINTENANCE
CABINET CLEANING
Wipe the front panel and other exterior sur-
●
faces of the TV with a soft cloth immersed
in lukewarm water and wrung dry.
Never use a solvent or alcohol. Do not spray
●
insecticide liquid near the TV. Such chemi-
cals may cause damage and discoloration to
the exposed surfaces.
SUPPLIED ACCESSORIES
Remote control unit
(N0147UD)
Batteries ("AA" x 2)
SPECIFICATIONS
GENERAL SPECIFICATIONS
Television system:
Closed Caption
System:
Channel coverage
VHF:
UHF:
CATV:
Tuning System
Channel access:
Terminals
Antenna input:
S-Video input:
Video input:
Audio input:
Headphone:
Stereo Sound System
2 speakers
The sub-ratings which set to [BLOCK]
●
<Rating Category
appear next to the rating category in the TV
Appropriate for all children
RATING menu.
Appropriate for children seven and
6) Press the MENU button to exit the menu.
older
General Audience
V-CHIP ACCESS CODE
Parental Guidance suggested.
To change the access code, follow these steps.
Unsuitable for children under 14
Mature audience only
1) Press the MENU but-
ton, then press the
CH(annel) ▲ or ▼ but-
ton to select V-CHIP
SET UP. Press the
VOL(ume) ▲ button to continue.
2) Press the number but-
tons to enter your old
access code. If you have
never set up your per-
sonal access code, use 0000.
3) Press the CH(annel) ▲
or ▼ button to select
CHANGE CODE.
Then, press the
VOL(ume) ▲ button to continue.
4) Use the number but-
tons to enter your
desired access code in
the NEW CODE space.
Then, enter the same code in the CONFIRM
CODE space. Your new access code is set.
You will return to the "V-CHIP SET UP".
TV-Y7
[BLOCK]
If the code in the CONFIRM CODE space does
B FV
[BLOCK]
not match the code in the NEW CODE space,
repeat step 4, making sure you enter the same
new code exactly in the CONFIRM CODE
space.
NOTES:
• If a power failure occurs, the default code,
B TV-Y
[VIEW]
TV-Y7(
) [VIEW]
0000, will be the active access code again.
TV-G
[BLOCK]
TV-PG(DLSV) [BLOCK]
• If you connect the power cord to an AC out-
TV-14 (DLSV) [BLOCK]
let that is controlled by a wall switch, your
TV-MA( LSV) [BLOCK]
personal access code will be erased every
time you turn off the power at the wall
switch. The default code will be the active
TV-PG
[BLOCK]
code again.
D
[BLOCK]
[IF YOU FORGET YOUR ACCESS CODE]
L
[BLOCK]
You should restore the access code to default
S
[BLOCK]
V
[BLOCK]
code, 0000. To restore 0000 as your personal
access code, unplug the TV's power cord for 10
seconds, then plug it in again.
PICTURE TUBE CLEANING
Wipe the picture tube of the TV with a soft
cloth. Before cleaning the picture tube, discon-
nect the power cord.
Owner's Manual
ELECTRICAL SPECIFICATIONS
NTSC-M
Sound output:
TV Standard
OTHER SPECIFICATIONS
§15.119/FCC
Remote control:
2 ~ 13
Operating
14 ~ 69
temperature:
2 ~ 13, A ~ W,
W+1 ~ W+84,
Power requirements: AC120V, 60Hz
A-5 ~ A-1, 5A
Power consumption
181 channel
(Maximum):
frequency synthesized
Picture tube:
tuning system
Dimensions:
Direct access keyboard,
programmable
scan and up/down
Weight:
VHF/UHF/CATV
75 ohm unbalanced
•Designs and specifications are subject to
(F-type)
change without notice.
Mini DIN 4-pin jack
•If there is a discrepancy between languages,
RCA connector x 2
the default language will be English.
RCA connector x 4
1/8" stereo (3.5mm)
PICTURE
CHANNEL SET
[ENGLISH]
ESPAÑOL
B V-CHIP SET UP
CAPTION
[OFF]
ACCESS CODE
- - - -
TV RATING
MPAA RATING
B CHANGE CODE
NEW CODE
_ _ _ _
CONFIRM CODE
_ _ _ _
1W, 8 ohm x2
Digital encoded
infrared light system
5°C to 40°C
(41°F~104°F)
75W
20"
H : 18-3/16" (462mm)
W: 19-15/16" (506mm)
D : 19-27/32" (504mm)
52.9 lbs. (24kg)
Publicidad
