Operating ER300
Turning the ER300 On/Off & Selecting a Band
To turn it on, press the BAND button. To cycle through AM or FM
press the BAND button again.
To turn it OFF, press and hold the BAND button for 2 seconds.
Adjusting the Volume
To adjust the volume, press the UP/DOWN/VOLUME control
buttons.
Tuning the Radio
Press the BAND button to cycle through AM or FM.
Once you are on the desired radio band, you can tune to the de-
sired station with the TUNE UP/DOWN buttons. For best FM
reception, fully extend the telescopic antenna and rotate until
reception is clear.
Setting the Clock
To set the clock, keep pressed the MENU button and select the
24 hour or 12 hour clock with the TUNE buttons.
Press the MENU button to adjust the time and again to adjust
the minutes.
Backlight Option
The ER300 has 3 backlight settings:
• OFF: The backlight will always be off.
• ON: The backlight will always be on.
• 5: The backlight will turn on for 5 seconds when a button is pres-
sed then turn off.
LED Flashlight
14 |
Midland ER300