Step 14 Replace Engine Access Panel; Step 15 Install Igniter Battery - Endless Summer 235020 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Contact 1-800-762-1142 for assistance.
Do not return to place of purchase.
Step 14 – Replace Engine Access Panel
• Slide Igniter wire onto Igniter post.
• Slide tab at top of Access Panel into slot in Emitter bottom.
• Rotate Panel down until holes line up at bottom.
• Secure Access Panel in place with thumbscrew.
• Replace Control Knob.
Step 15 – Install Igniter Battery
Note: This step is required only for models with electronic ignition.
• Remove battery cover cap by turning cap counterclockwise.
• Install (1) AA battery. Negative end of battery goes in first.
• Replace battery cover cap by turning cap clockwise.
Note: Once you have successfully completed assembly steps 1-14 you
are ready to begin operating your heater.
Owner's manual and assembly instructions: model 235020 outdoor patio heater
1/15/03
12

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido