Cameo ZENIT Z120 G2 Manual De Usuario página 7

CONFIGURING DMX MODE (DMX Mode)
Press MODE to access the selection menu. Now select the menu item "DMX Mode" using the UP and DOWN keys (observe arrow) and press
ENTER. Now select the desired DMX operating mode with the UP and DOWN buttons and confirm with ENTER. Comprehensive DMX tables
can be found in these instructions under "DMX CONTROL".
---------------- Menu ----------------
DMX Address
 DMX mode
Stand Alone
Slave
Settings
System Information
SETTING STANDALONE MODE
Press MODE to access the selection menu. Using the UP and DOWN controls, select the menu item "Stand Alone" (observe arrow) and
confirm with ENTER. In the sub-menu you can now use the UP and DOWN buttons to select from the stand-alone modes "Auto", "Colour
Macro", "Static", "Tunable White", and "User Colour". Confirm your selection with ENTER.
---------------- Menu ----------------
DMX Address
DMX mode
 Stand Alone
Slave
Settings
System Information
STAND-ALONE AUTO MODE (Auto Programme 1–6)
The 6 different auto-programmes each comprise non-editable colour-change sequences. Brightness and speed are independently
adjustable. Select auto mode as per the procedure previously described in SETTING STAND ALONE MODE and confirm with ENTER. Using
the UP and DOWN controls, now select one of the 6 auto-programmes (observe arrow) and confirm with ENTER. To adjust brightness, use
the UP and DOWN controls to select the menu item "Dimmer", and confirm with ENTER, then use the UP and DOWN controls to select the
desired value between 000 and 100. Confirm with ENTER. Set the run speed by selecting the menu item "Speed", confirm with ENTER, and
then select the desired value between 000 and 100. Confirm with ENTER.
-------- Stand Alone -------
 Auto
Static
Colour Macro
Tunable White
User Colour
------------- DMX Mode -----------
 3 CH
4 CH
5 CH
9 CH
10 CH
11 CH
17 CH
------------- Stand Alone -----------
 Auto
Static
Colour Macro
Tunable White
User Colour
----------- Auto -----------
 Program 1
Program 2
Program 3
Program 4
Program 5
Program 6
--------- Program x ---------
 Dimmer <100>
Speed <100>
Dimmer Speed
000 000
– –
100 100
Mode
Auto
7