Powerfix KH 2919 Instrucciones De Uso página 8

Assembling the roller-wheels
• Place the Mobile Tool Cabinet on its back and, to
protect the paintwork, lay the packaging material
under it.
When fitting the four roller-wheels, the two roller-
wheels with brakes must both be fitted to one side of
the Mobile Tool Cabinet.
• To fit a roller-wheel, insert 4 hexagonal screws
with a washer from inside, and through the ap-
propriate holes in the floor, the Mobile Tool Cabi-
net.
• Place the roller-wheel from the bottom onto the
screws.
• Secure the roller-wheel with an hexagonal nut
and washer onto each of the screws.
• Firmly tighten each of the screws with an M10
open-ended spanner, both on the inside and the
outside.
Do not tighten the screws excessively, otherwise the
screw threads could be stripped!
Fig. 3
Cleaning
Clean the Mobile Tool Cabinet with a lightly
moistened cloth. Aggressive cleaning materials may
not be used.
Disposal
Do not dispose of the appliance in your
normal domestic waste.
Dispose of the Mobile Tool Cabinet through an ap-
proved disposal centre or at your community waste
facility. Observe the currently applicable regula-
tions. In case of doubt, please contact
your waste disposal centre.
- 10 -