Descargar Imprimir esta página

OK. 50BT-B Manual De Instrucciones página 25

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 28
PLAYBACK FUNCTIONS
• All playback functions can be managed through the controls of the connected external device.
• Alternatively, use the remote control in Bluetooth mode.
Key
/PAIR
BLUETOOTH MODE
• External Bluetooth devices can be connected to the appliance via Bluetooth connection.
• Press repeatedly SOURCE to activate the Bluetooth function. The display shows bt, then no bt.
• Activate the Bluetooth function of the external device and search for Bluetooth devices.
• Select OCS 100BT-B from the Bluetooth device list.
• Follow the instructions shown on your device's screen. Specific pairing procedures may vary with
different Bluetooth devices. Refer to your device's manual for further information.
• When the Bluetooth connection is established, bt shows on the display.
• Files from your connected Bluetooth device are played through the soundbar now.
• Disconnecting from the Bluetooth device:
- press and hold
- choose a different source, or
- disconnect using your Bluetooth device.
Note:
Bluetooth works best within a range of up to
• The music streaming may be interrupted by obstacles between the device and speaker, such as walls,
metallic casing that covers the device, or other devices nearby that operate in the same frequency.
• If the connected device goes out of Bluetooth range, the appliance will reconnect automatically when
the device comes back into range.
NFC FUNCTIONS
Note:
Near field communication (NFC) is a set of standards for smartphones and similar devices to establish
radio communication with each other by touching them together or bringing them into proximity,
usually no more than a few centimetres.
• Pre-requisite: In order to use the function, your mobile device needs to be NFC capable.
• Preparation: Enable NFC function on your mobile device. Disconnect any active Bluetooth
connection from your mobile device.
• Connecting:
10
- Tap the mobile device on the
- Pairing is done automatically. Follow the instructions shown on your mobile device's screen, if
any.
- Operate your mobile device directly for playback features.
• Disconnecting:
- Tap the mobile device on the
- Disable NFC from your mobile device.
IM_OCS 100BT-B_V06.indb 25
Function
During playback:
Press 1x: Pause playback.
Press 2x: Resume playback.
Press and hold a few seconds: Activate the pairing mode.
Press 1x: Skip to the beginning of the next title
Press 1x: Skip to the beginning of the previous title.
/PAIR for a few seconds,
6
metres.
icon of the soundbar.
icon, or
25
EN
1/3/2017 11:33

Publicidad

loading

Productos relacionados para OK. 50BT-B

Este manual también es adecuado para:

100bt-b