Philips SBC SC250 Modo De Empleo página 9

Problem solving
Problem
Temperature too low.
Temperature too high.
The jar has not been
heated correctly.
Unit does not warm up.
The indicator light
switches on and off
while keeping warm.
Indicator light does not
seem to light.
The bottom of the tank
is spotted.
All manuals and user guides at all-guides.com
Solution
• Turn the click-step control knob
4 to the right until the indicator
lamp lights up red to start the
heating up again.
• Check ring filling and start
temperature.
• Lower the adjustment setting.
• Check ring filling and start
temperature.
Stir the contents from time to time
while heating. Check that the
click-step control knob is in the
Wait 15 minutes between
consecutive uses to allow the safety
cut-out to reset.
This is normal; it may turn on or off
while heating.
Shield indicator from ambient light
to improve visibility.
Hard water deposits are normal
and may increase if your water is
very hard; remove the deposits
periodically with white vinegar
(see maintenance).
position.
ENGLISH 9