Sylvania LD190SS1 Manual Del Usuario página 26

O
PTIONAL SETTING
 Sound Adjustment
You can adjust the sound mode, equalizer and some other sound functions.
Before you begin:
You must set "Home" in "Location". Refer to page 33.
Otherwise, the settings you adjusted will not be
memorized after you turn off the unit.
1
Press [SETUP] to display the main menu.
2
Use [Cursor K / L] to select "SOUND", then press
[ENTER].
3
Use [Cursor K / L] to select the sound type you want to
adjust, then press [ENTER].
4
Adjust the following items.
Sound Mode
Use [Cursor K / L] to select the desired setting, then
press [ENTER].
("Personal ", "Standard ", "Movie ", "Music" and "News ")
Equalizer
Adjust tonal quality for each frequencies.
Use [Cursor s / B < > ] to select the specific frequency
and use [Cursor K / L] to adjust the level, then press
[ENTER].
24
EN
Sound Sound 5
Sound Mode Standard
Equalizer
TV Speakers Ext. Amp
Sound Sound
Sound Mode
Personal
Equalizer Standard
TV Speakers Movie
Music
News
Equalizer Equalizer
0 0 0 0 0
120Hz 500Hz 1.5kHz 5kHz 10kHz
TV Speakers
Select the audio output from the unit's speakers, or not.
If your amplifier is HDMI link function compatible and
connected by an HDMI cable to this unit, some sound
operations such as volume up can be changed by using
this unit's remote control.
Use [Cursor K / L] to select the desired option, then
press [ENTER].
The sound will be output from the unit's
On
speakers.
The sound will not be output from the
Off
unit's speakers.
You can control audio output from your
Ext. Amp connected HDMI link devices by using
this unit's remote control.
Press [SETUP] to exit.
Note:
• To cancel sound adjustment, press [SETUP].
• We do not guarantee 100% interoperability with other
brands of HDMI link devices.
TV Speakers TV Speakers
"On":
On
Sound will be output from the TV
Off
speakers.
"Off": Ext. Amp
Sound will not be output from the
TV speakers.
"Ext. Amp":
Operation is possible by connecting
to the HDMI-CEC compatible amp
with a HDMI cable. For details look
in the user manual.