Using the cooktop burners
Using the hood control feature
NOTE
This product features a Bluetooth device that you can use to connect the cooktop
to Samsung hood control models. Through the Bluetooth connection, you can
use the hood control function on the SmartThings app. (for NA30N7755T*/
NA36N7755T* only)
For matching hood control-enabled cooktops and hoods, refer to the below table.
Gas cooktop
NA30N7755T*
Model
NA36N7755T*
To connect to a hood control model and a hood:
1. Download and run the SmartThings app on your smartphone. Then, complete
the Smart Connect procedure to connect to the cooktop.
2. Follow the Bluetooth instructions of the hood control model and activate the
Bluetooth connection.
3. Press the Bluetooth icon
on the hood control panel. The Bluetooth icon LED
blinks.
4. Press the Bluetooth button on the cooktop. Paring begins.
5. When Bluetooth pairing is finished, the Bluetooth icon LED stops blinking and
glows steadily.
6. Follow the instructions in the user manual of the hood control model and the
App guide to use the hood control.
18 English
NA30N6555TG_DG68-01089A-01_EN+MES+CFR.indb 18
NOTE
The Bluetooth button is below the LF control knob. If you need to press the
Bluetooth button, remove the LF control knob by grasping it and then pulling it
straight up.
Hood
NK30K7000W*
NK36K7000W*
Bluetooth on/off
1. Press the Bluetooth icon
NOTE
• The Bluetooth icon LED on the hood is on when Bluetooth is enabled.
The Bluetooth icon LED on the hood is off when Bluetooth is not enabled.
• If the Smart Connect connection is not successful, you cannot use the
SmartThings app to monitor and control the hood.
• Without a Smart Connect connection to the cooktop, you can use a Bluetooth
connection to pair the cooktop with the hood and sync them. To do this, follow
the Bluetooth connection steps on the left.
• Bluetooth will not work properly if the Bluetooth connection is unstable.
• See the SmartThings app manual for detailed information.
Bluetooth button
on the hood control panel.
5/28/2018 12:47:21 PM