Protecting your hearing
(AVLS)
The AVLS (Automatic Volume Limiter
System) function keeps down the maximum
volume to protect your hearing.
Press and hold SOUND until "AVLS
ON" appears in the display.
Flashes when the volume is turned up
beyond a certain level.
To turn off the AVLS function
Press and hold SOUND until "AVLS OFF"
appears in the display.
Note
If you use the SOUND function and the AVLS
function at the same time, sound may be distorted.
If this happens, turn down the volume.
Locking the controls
(HOLD)
You can lock the controls on your CD player
to prevent accidental button presses.
Slide HOLD in the direction of the
arrow.
"HOLD" flashes if you press any button
when the HOLD function is activated.
You can use the HOLD function with both
the CD player and remote control. You can
still operate your CD player using the remote
control when HOLD on the remote control is
set to off.
To unlock the controls
Slide HOLD in the opposite direction of the
arrow.
Turning off the
operation beep sound
You can turn off the beep sound that is heard
from your headphones/earphones when you
operate your CD player.
1
Remove the power source (AC
power adaptor, rechargeable
batteries or dry batteries) from the
CD player.
2
Connect the power source while
pressing x/CHARGE on the CD
player or x on the remote control
for about one second or more.
To turn on the beep sound
Remove the power source and then connect
the power source without pressing
x/CHARGE or x.
25
-GB