OPERATING YOUR APPLIANCE
Temperature Control and Display
• The temperature in the upper zone and lower zone can be independently controlled
and displayed.
• The temperature in either zone can be controlled between 39
(The zone temperature may have a tolerance of +/-5
depending on different loading and ambient conditions).
• The temperature control and display, the
control pads near the symbol
• The temperature control and display, the
control pads near the symbol
• The indicator lights
lock and for lighting
Indicator Light
• When lit, the
• When lit, the
lock indicator light indicates that all of the control pads are locked
and no adjustment can be made to that zone.
• When lit,
indicates that the corresponding zone is in the refrigeration cycle
(compressor is running). The
temperature is reached.
Standby
• When the unit is plugged in, the display and pads will illuminate for 3 seconds and an
audible beep will be heard. Then the unit will automatically resume its previous
setting from when it was switched off. If the unit was previously in "Standby" mode
when switched off, it will resume in "Standby" mode and the
will remain lit.
• You can manually set your unit to "Standby" mode by pressing and holding both the
warmer
and
seconds, provided that the control pads are unlocked and no other setting is in
operation (the display does not flash). The
to confirm "Standby" mode. Repeating this action once more will restart the unit.
(left side) are for the upper zone of the wine cooler.
(right side) are for the lower zone of the wine cooler.
for standby and
are for both zones.
standby indicator light shows that the unit is in "Standby" mode.
indicator light will turn off once the desired
colder buttons of the lower zone control pads for approximately 3
ENG - 11
o
F to 61
F (+/-3
C) from the setting
o
o
indicator, the warmer
indicator, the warmer
lock, as well as the control pads to
standby indicator light will turn on
11
o
F (4
o
C to 16
o
C).
and
colder
and
colder
standby indicator