Publicidad
Idiomas disponibles
Idiomas disponibles
Functions
The blender has 16 function buttons in total: "ON/OFF", 8 speed buttons, +20s, Pulse, 5 automatic functions
(Vegetable, Smoothie, Nuts, Ice Cream and Bisque).
After a cycle is completed, you hear a beep sound (when the power indicator is on, you can control all the
functions except the Pulse function).
Press the buttons lightly and do not hold too long.
Button
Press
button to turn the blender on/off. The button lights up and the blender switches to the
standby mode. A flashing indicator shows the blender is in the activated mode.
This button also pauses/cancels the functions.
When you put the container on the base, the indicator of the "ON/OFF" button lights up and the
blender switches to the standby mode. After a cycle is completed, remove the container from the base
to avoid fire or electric shock.
• You can increase the speed by sliding your finger from left to right and decrease from right to left.
• The first button from the left
decrease the speed from right to left.
• The first button from the right
to right.
• Six middle buttons
• The blender has 8 speeds. There is a preset operation time of 1 minute for each speed.
• This function is used for the manual setting. You can stop this function after just 1 minute depending
on the amount of food and your taste or press the "+20" button to increase the total time.
• During operation, you can also adjust the speed by pressing the desired speed button or by gradual
pressing each button.
• When the blender is the manual mode, please, first 5 seconds blend at a low speed and then gradually
increase the speed.
• The speeds for automatic functions are preset, it means that the manual speed adjustment function
cannot be used simultaneously with automatic functions.
Attention: Do not hold the buttons too long when adjusting the speed. The speed buttons are dedicated
for adjusting the speed in the manual mode, so you can set the speed according to the type of food, the
amount of food and your taste. Manual speed adjustment buttons cannot be used for 6 automatic functions.
+20s button
• The operating time is prolonged by 20 seconds by each pressing of the button.
• The maximum time is 10 minutes.
• During operation, you can prolong the operating time of any function except the PULSE function.
• If you press this button in the activated mode, the blender will operate at high speed for 20 seconds.
During operation, you can also press the button repeatedly to prolong the total operating time.
• This function can be used for any function except the Pulse function.
SM 3 050
Manual speed adjustment buttons
represents the speed 1, which is the lowest speed. You gradually
represents the speed 8. You gradually increase the speed from left
represent the speeds 2, 3, 4, 5, 6 and 7 (from left to right).
EN
5 7
Publicidad
