Bosch GSB Professional 13 RE Manual Original página 7

OBJ_BUCH-61-009.book Page 7 Tuesday, May 10, 2016 11:26 AM
Safety Warnings for Drills
 Wear ear protectors when impact drilling. Exposure to
noise can cause hearing loss.
 Use auxiliary handle(s), if supplied with the tool. Loss
of control can cause personal injury.
 Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
may contact hidden wiring or its own cord. Cutting ac-
cessory contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the operator an
electric shock.
 When working with the machine, always hold it firmly
with both hands and provide for a secure stance. The
power tool is guided more secure with both hands.
 Use suitable detectors to determine if utility lines are
hidden in the work area or call the local utility company
for assistance. Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can lead to explo-
sion. Penetrating a water line causes property damage or
may cause an electric shock.
 Switch off the power tool immediately when the tool in-
sert jams. Be prepared for high reaction torque that
can cause kickback. The tool insert jams when:
— the power tool is subject to overload or
— it becomes wedged in the workpiece.
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
 Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse
(ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place by an
authorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only: Use a residual current
device (RCD) with a rated residual current of 30 mA or
less.
Technical Data
Impact Drill
Article number
Rated power input
Output power
No-load speed
Rotational speed under load, max.
Impact rate
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Bosch Power Tools
Product Description and
Specifications
Intended Use
The machine is intended for impact drilling in brick, concrete
and stone as well as for drilling in wood, metal and plastic. Ma-
chines with electronic control and right/left rotation are also
suitable for screwdriving and thread-cutting.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Keyless chuck*
2 Front sleeve
3 Rear sleeve
4 "Drilling/Impact Drilling" selector switch
5 Lock-on button for On/Off switch
6 On/Off switch
7 Thumbwheel for speed preselection (GSB 16 RE)
8 Rotational direction switch
(GSB 10 RE/GSB 13 RE/GSB 16 RE)
9 Button for depth stop adjustment*
10 Wing bolt for adjustment of auxiliary handle*
11 Auxiliary handle (insulated gripping surface)*
12 Depth stop*
13 Handle (insulated gripping surface)
14 Chuck key*
15 Key type drill chuck*
16 Universal bit holder*
17 Screwdriver bit*
18 Hex key**
19 Open-end spanner**
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
**Commercially available (not included in the delivery scope)
GSB ... 10 10 RE
3 601 ... B16 0.. B16 1..
W 500 500
W 250 250
-1
min 2600 0 – 2600
-1
min 1610 1610
-1
min 25700 25700
English | 7
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
13 13 RE 16
B17 1..
B17 0.. B17 6.. B18 0..
600 600 701
301 301 351
2800 0 – 2800 3000 0 – 3000
1570 1570 1640
25070 25070 26270
1 609 92A 1WV | (10.5.16)
16 RE
B18 1..
B18 6..
701
351
1640
26270