Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance
Cleaning the mesh filter
Clean the mesh filters in the water inlets once or twice a year.
NOTE
If a mesh filter is clogged, the " 4C " information code appears on the washer's display
screen.
54
English
Untitled-2 54
Untitled-2 54
1. Turn off the washer, and then unplug
the power cord.
2. Close the water taps.
3. Loosen and disconnect the water hoses
from the back of the washer. Cover the
end of each hose with a cloth or towel
to prevent water from gushing out.
4. Use pliers to pull out the mesh filter
from the inlet valves.
5. Thoroughly clean the mesh filters in
water.
6. Completely dry the mesh filters. Do not
dry in direct sunlight.
7. Reinsert the mesh filters, and then
reconnect the water hoses.
8. Open the water taps.
2022-06-28
2022-06-28
3:26:04
3:26:04
Publicidad
