Futurelight CY-250 Manual Del Usuario página 26

Note:
After switching on, the CY-250 will automatically detect whether DMX 512 data is received or not. If the data
is received, the control LED flashes. If there is no data received at the DMX-input, the control LED lights up
permanently.
This situation can occur if:
- the 3 PIN XLR plug (cable with DMX signal from controller) is not connected with the input of the CY-250.
- the controller is switched off or defective, if the cable or connector is defective or the signal wires are swap
in the input connector.
Note:
It's necessary to insert the XLR termination plug (with 120 Ohm) in the last lighting in the link in order to
ensure proper transmission on the DMX data link.
DMX-protocol
Control channel 1 - Horizontal movement (Pan)
Push slider up in order to move the mirrored cylinder horizontally (PAN).
Gradual mirrored cylinder adjustment from one end of the slider to the other (0-255, 128-center). The
mirrored cylinder can be stopped at any position you wish.
DMX-value Feature
0-255 Gradual adjustment of the mirrored cylinder position from left to right
Control channel 2 - Vertical movement (Tilt)
Push slider up in order to move the mirrored cylinder vertically (TILT).
Gradual mirrored cylinder adjustment from one end of the slider to the other (0-255, 128-center). The
mirrored cylinder can be stopped at any position you wish.
DMX-value Feature
0-255 Gradual adjustment of the mirrored cylinder position from down to up
Control channel 3 - Colour-wheel
Linear colour change following the movement of the slider. In this way you can stop the colour-wheel in any
position.
DMX-value Feature
0-18 White
18-35 Dark blue
36-53 Pink
54-71 Light green
72-89 Orange
90-107 Light blue
108-126 Yellow
127 Cherry red
128-191 Forwards rainbow effect with increasing speed
192-255 Backwards rainbow effect with increasing speed
Control channel 4 - Rotating gobo-wheel
DMX-value Feature
0-15 Open
16-31 Rot. gobo 1
32-47 Rot. gobo 2
48-63 Rot. gobo 3
64-79 Rot. gobo 4
80-95 Rot. gobo 5
96-111 Rot. gobo 6
112-127 Rot. gobo 7
128-191 Forwards gobo-change with increasing speed
192-255 Backwards gobo-change with increasing speed
Control channel 5 - Gobo rotation
All manuals and user guides at all-guides.com
26/52 51837530X18NXS_V_1_0.DOC