Velleman CAMSET31 Manual Del Usuario página 5

13. Restore power to the vehicles' electrical system; insert the ignition key
in the ignition switch and turn.
14. The monitor will now show the image of the camera. Verify that this
image is upright. If not rotate the camera until it is, than secure it by
tightening the nut [F].
7. Technical Specifications
system
monitor size
number of pixels
video inputs
camera pick-up element
synchronization
video output
horizontal resolution
IR LEDs
min. illumination
lens angle
S/N ratio
video input signal
A/V input connections
power supply
max. current
cable
operating temperature
dimensions monitor
camera
weight monitor
camera
Use this device with original accessories only. Velleman nv cannot
be held responsible in the event of damage or injury resulting from
(incorrect) use of this device.
For more info concerning this product and the latest version of this
manual, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior
notice.
V. 01 – 18/03/2013
CAMSET31
NTSC
3.5" TFT
480(H) x 320(V)
1
1/4" colour CMOS
internal
mirror image
420 TV-lines
9
0 Lux when IR on
120°
>= 48dB
1.0Vpp composite video signal at 75 ohm
RCA connector
DC 12V ±1.5V
300mA
1x monitor cable (±2m), 1x power cable
(±1.5m), 1x video cable (±6m), 1x camera
cable (±1.5m)
-20°C ~ +60°C
93 x 102 x 45mm
31 x 31 x 35mm
±120g
±60g
5 ©Velleman nv