Publicidad
Idiomas disponibles
Idiomas disponibles
TO OPERATE YOUR AIR PURIFIER
1. Place the air purifier on a sturdy, flat surface.
2. Make sure the unit is plugged in.
3. Turn On: Press the Power ON button.
4. 3 Fan Speeds: Select or change fan speed (choose 1, 2 or 3).
Start by pressing the fan speed button, continue pressing until you have
reached your desired setting, then release the button.
5. 12-Hour Timer Function: To select the desired time, press the timer button.
The timer will show settings ranging from 1 hour – 12 hours and off. If there
is no time selected, the timer will be off. The unit will continue to run until the
power is turned off.
6. Child Safety Lock: The child safety lock can be activated by pressing and
holding the lock button for 3 seconds. All buttons on the air purifier will now be
in locked mode. To take the unit off locked mode, simply hold the lock button
again for 3 seconds and the unit will now be unlocked.
7. Sleep Mode/Night Light: To activate the night light press once. The blue night
light will illuminate along with the control panel lights.To activate Sleep Mode.
Press the icon a second time, and the Moon symbol will illuminate in addition
to the night light. Press the icon one more and only the moon icon will be
illuminated.
8. Filter Replacement Light: The filter replacement light will illuminate in RED
when it is, it is time to replace the dual action HEPA H13 and active carbon
filters on the unit. The filter light will illuminate after 2,500 hours of continuous
use.
Note:
Utilizing an H13 High-Grade HEPA filter does not make this a medical device.
REMOVING FILTERS
Always unplug your Cuisinart Purxium™ Air Purifier from the electrical outlet
before replacing or removing filters.
To remove the Purxium Air Purifier filters, you will first need to unplug the unit
and remove the back panel. To remove both side panels, place your finger into
the opening on the side of the unit and pull lightly on the panel. The metal
removable, reusable pre-filters may be removed easily by taking the small tab
and pulling slightly up and away from the unit. To remove the H13 HEPA/Active
Carbon filter system, you simply pull on the filter and remove from the unit.
Repeat step on other side.
INSTALLING YOUR REPLACEMENT
FILTER SYSTEM
1. Your air purifier will automatically tell you when its time to change your filter.
An icon on the control panel will illuminate after 2500 hours of purification has
been reached.
2. Slide the new H13 HEPA/Active Carbon filter system into the unit until you
feel resistance.
3. Place the washed and dried removable, reusable metal pre-filters into the slots.
Place panels back onto the unit. Repeat step for other side.
4
Publicidad
