Publicidad
CUTTING A HOLE FOR YOUR CAT FLAP
Using the horizontal line as the starting point, draw a square 168mm wide
(6
1
/
") x 175mm high (6
3
/
") (Fig 3).
2
4
Drill holes at each corner (Fig. 4).
Cut along the lines using a jig saw (Fig. 5).
Smooth out the rough edges (Fig. 6).
FIG. 3
168mm
1
(6
/
")
2
175mm
3
(6
/
")
4
FIG. 5
4
All manuals and user guides at all-guides.com
FIG. 4
FIG. 6
Tunnels (Optional)
The cat flap is designed to fit any depth
of hole. It is recommended that the
tunnels be glued on to the frame
(Fig. 7). Simply attach tunnels to the
required depth.
To purchase additional tunnels contact
the Customer Care Center at
1-800-732-2677
FITTING YOUR CAT FLAP
Your Petsafe cat flap is fitted with the red 4 way lock on the inside of
your door.
Place the cat flap in the hole and mark screw holes in the outside cover
in pencil. (Fig. 8).
Remove the cat flap and drill the holes with a 4.5mm (
(Fig. 9).
FIG. 8
FIG. 7
3
/
") drill bit
16
FIG. 9
4.5mm
3
(
/
")
16
Publicidad
