Intermatic ET90215C Guía De Instalación Y Programación página 12

SYSTEM CONFIG
REVIEW MODE
PROG COPY/RESTORE
PASSWORD SETUP
EDIT SYSTEM NAME
NETWORK SETUP
FIRMWARE UPDATE
RESET TO FAC DEFAULT
ENTER
ADVANCED OPTIONS
Use Advanced Options to edit already-existing
programming, configure circuits and zones, and set up
your system.
From the STATUS screen, press ENTER and navigate to
ADVANCED OPTIONS. Press ENTER to access DATE,
TIME, DST, or ASTRO on the DATE/TIME CONFIG
screen.
DATE
Press ENTER to correct the date.
TIME
Press ENTER to change the current time (hours,
minutes, AM or PM) or the display mode for the time
(12 HOUR AM/PM or 24 HOUR).
DST (DAYLIGHT SAVING TIME)
Press ENTER to
enable/disable DST, set
the DST time zone, and
set up effective dates
(start and end date of
DST).
ET90000 Series Electronic Timer
ADVANCED OPTIONS
DATE/TIME CONFIG
EVENT CONFIG
ADD EVENT
MODIFY EVENT
DELETE EVENT
DT.DST.EFF—DATES
START DATE (SUN):
FOURTH WK OF FEB
END DATE (SUN):
FIRST WK OF OCT
ENTER
DATE
TIME
DST
ASTRO
CIRCUIT CONFIG
EDIT CKT NAME
ENABLE CKT EVENTS
MANUAL ACTIVATE MODE
EXTERNAL OVERRIDE
ZONE CONFIG
ADD ZONE
MODIFY ZONE
DELETE ZONE
HOLIDAY CONFIG
ADD HOLIDAY
The con guration screens can be
MODIFY HOLIDAY
navigated using the right or left keys. The
DELETE HOLIDAY
accompanying instructions are presented
based on a right-key sequence.
ASTRO
From ASTRO, you can
define an Astronomic
zone (country, location
in country, and
quadrant location).
Also, if you need to
adjust the time of the
astronomic zone, you
can do so against
the "calculated time" from the ASTRO ADJUSTMENT
screen.
12
DT.ASTRO .ADJUSTMENT
CALCULATED TIME
SUNRISE SUNSET
5:26 AM 5:29 PM
ENTER NEW TIME
SUNRISE SUNSET
5:26 AM 5:29 PM