Fagor 3LVF-623 Manual De Instrucciones página 108

Problem
The dishwasher will not
start
The dishwasher beeps at
the end of the wash cycle
The rinse aid indicator
is on
The wash cycle takes
too long
The dishes are not clean
enough
108
All manuals and user guides at all-guides.com
Possible cause
The dishwasher will not
start
The appliance is not
connected to the mains
power The Delay start
function is selected
Child Lock is enabled
(selected models)
It indicates the end of the
wash programme and
emits a beep
The LED display shows
"Lsb"
The dishwasher is con-
nected to hot water
The duration of the
wash programme varies
depending on how soiled
the dishes are
The disinfection option
has been selected
The water pressure is
temporarily low
The temperature of the
inlet water is low
The dishes are arran-
ged too close together.
The detergent is used
incorrectly
The selected wash pro-
gramme is not suitable
for the level of soil on the
dishes
The spray arm rotation is
blocked
Solution
The dishwasher door is open — close the door.
Close the door carefully, make sure it is closed fully
Turn off the Child Lock
Add rinse aid
Check the dishwasher, make sure it is properly
connected to hot water
When heavy soil is detected, auto and normal
programmes, automatically extend the wash
cycle duration
When you select the disinfection option, the wash
cycle time will be extended to reach the disinfec-
tion temperature
Use a dishwasher when the pressure is normal
Ensure that the dishwasher is connected to hot
water. Try not to use the dishwasher if hot water is
used elsewhere in the household
Rearrange the dishes in accordance with the ins-
tructions. Use the amount of detergent suitable
for the water hardness and the selected wash
programme. Use a new/different detergent
Select a different, more intensive/longer wash
programme
Make sure that the spray arm rotates freely