Publicidad
Idiomas disponibles
Idiomas disponibles
05 Time
06 Wrinkle Prevent
07 Eco Dry
08 Damp Alert
09 Drum Light
10 Adjust Time
11 Smart Control
(Electric models
only) / Smart
Monitor (Gas models
only)
12 Power
13 Start/Pause (Hold to
Start)
NOTE
Do not take extremely tangled items from your washer and put them into the dryer. They can degrade the
drying efficiency of the dryer or cause the door to open. We recommend that you untangle the items before
putting them into the dryer. Also, do not put objects on the dryer, especially on the control panel.
Untitled-8 43
Press to adjust the drying time for the Manual Dry cycles. This is not
available with the Sensor Dry cycles because the dryer determines the
drying time by sensing the current moisture level of the load.
Wrinkle Prevent provides approximately 180 minutes of intermittent
tumbling in unheated air at the end of the cycle to reduce wrinkling. Press
Wrinkle Prevent to activate this feature. The load is dry, and can be removed
at any time during the Wrinkle Prevent cycle.
This function is available with NORMAL and TIME DRY.
With the Eco Dry activated, drying takes a longer time but the power
consumption is reduced.
The drying time can be extended by up to 3 times depending on the
temperature and load. The Eco Dry function is enabled by default. (See the
"Cycle chart" on page 50.)
This alert is available for all Sensor Dry cycles except for ACTIVEWEAR.
Available dry levels are Normal, More, and Extra.
If a load contains mixed fabrics, the Damp Alert indicator blinks when
average dryness of the items in the load is 80 % dry. This lets you take items
that you don't want fully dried or that dry quickly out of the dryer early while
letting others continue to dry.
Press to turn the interior lamp on or off. The lamp stays lit for 2 minutes after
it has turned on, regardless of whether the power is on or off or the door is
open or closed, and then turns off automatically.
You can change the set time in the Manual Dry cycles. (QUICK DRY, TIME
DRY, and AIR FLUFF) To change the cycle time, press
desired time is displayed.
After connecting the Tumble Dryer to your home network using the
Samsung Smart Washer/Dryer app, you can control or monitor the dryer
remotely. When started, the Smart Control (Smart Monitor) indicator blinks.
The dryer enters waiting mode and waits for remote commands.
Press to turn on/turn off the dryer.
Press to start or stop operation.
or
until the
English 43
2022-06-16
12:38:21
Publicidad
