Philips SHC8585 Instrucciones De Manejo página 9

SHC8585 22-12-2005
No sound/
distorted sound
10:45 Pagina 9
Wrong headphone orientation
when placed onto the charging
dock
Headphone power off
No battery installed
Wrong battery orientation
No power supply to transmitter
Battery power running low
Audio source not connected
Audio source is off
Volume level set too low
Audio output level low
Headphone not tuned to
the transmitter
Interference from other
radio sources
ENGLISH 9
Reposition the headphone with
correct orientation.
Push the POWER ON/OFF
BUTTON. The POWER ON/OFF
INDICATOR light turns on automatically
indicating the headphone is on.
Follow step 1 to 4 of
'Installing/replacing the batteries'
Reposition the batteries according to
the engraved polarity symbol.
Make sure the docking station is
connected to the local mains power
supply through an adapter and follow
step 5 to 7.
Follow steps 5 to 7 to recharge the
system.
Make sure the audio output of your
audio source is connected to the
3.5 mm STEREO INPUT JACK of
your transmitter. Follow step 9 to 12.
Turn on your audio source.
Adjust the volume level of your
audio source or the headphone.
Hearing Safety: Continuous use at a
high volume may permanently damage
your hearing.
In case of audio sources with
adjustable output level, adjust the
output level to a higher and
non-distorted level.
IMPORTANT: In case of certain TVs,
the headphone jack output level can
only be adjusted after accessing the TV
on-screen menu.
Push and hold the AUTO-TUNING
BUTTON for about 1 sec, then the
headphone will automatically search
for the best possible reception.
1) Alter the transmitter's frequency
channel. Select 1 of the 3 options for
best reception.We advise you to
select channel 1 as the first option.
Next adjust the headphone's tuning
channel as described above.
2) Move transmitter or headphone
elsewhere