Publicidad
Idiomas disponibles
Idiomas disponibles
Installation to Solid Concrete surface
• When installing Peerless ceiling mounts on a concrete ceiling, the ceiling must be at least 8" thick with a minimum
compressive strength of 2000 psi. Never attach concrete expansion anchors to concrete covered with plaster,
drywall, or other finishing material.
Use ceiling plate (A) as a template to mark eight mounting holes on concrete ceiling. Drill eight 3/8" (10 mm)
1
dia. pilot holes to a minimum depth of 3" (76 mm). Place ceiling plate over mounting holes and secure with eight
concrete expansion anchors (C) as shown below. Tighten all fasteners.
WARNING
A
C
1
Drill 3/8" (10 mm) dia. holes.
2
Place ceiling plate (A) over holes and secure with concrete
expansion anchors (C)
3
Tighten all fasteners. Tighten to 35 ft. • lb (47 N.M.) maximum
torque.
4 of 32
concrete
surface
A
ISSUED: 06-22-10 SHEET #: 061-9054-7 07-08-15
C
Publicidad
