Using the appliance
1. Place the appliance on a level, non slip surface and connect the appliance to a properly installed plug socket.
2. Place a bowl beneath the opening of the cutter holder in order to catch your food.
3. Switch on the appliance by holding down the On/Off switch. Press the On/Off switch briefly one to two
times before you place any food into the feed tube so that the cutter locks on the drive shaft.
4. Use the plunger to push food further down.
5. Remove the mains plug from the socket after use.
6. Remove the cutter after use.
7. Clean the appliance and the accessories after each use.
• Remove the plug from the mains socket before cleaning the appliance.
• Never immerse the motor unit in water or other liquids.
• Be careful when handling the cutters; the blades are sharp!
• Do not use corrosive or abrasive cleaning agents to clean the appliance.
• As required, wipe down the motor unit with a damp cloth. Then dry the appliance with a dry cloth.
• Clean the cutter holder, the cutters and the plungers with clear, warm water and a little mild detergent.
• Store the appliance in a dry place that is not accessible to children and pets.
• Do not clean any parts in dishwasher.
According to the European waste regulation 2002/96/EC this symbol on the product
or on its packaging indicates that this product may not be treated as household waste.
Instead it should be taken to the appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For more de-
tailed information about recycling of this product, please contact your local council or your
household waste disposal service.
Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European Directives:
2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)
11
Cleaning and Care
Hints on Disposal
Declaration of Conformity