Descargar Imprimir esta página

SSP GA7030 Manual De Instrucciones página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

FUNCTIONAL DESCRIPTION
CAUTION:
Always be sure that the tool is switched off and
unplugged before adjusting or checking function
on the tool.
Shaft lock
1
006733
CAUTION:
Never actuate the shaft lock when the spindle is
moving. The tool may be damaged.
Press the shaft lock to prevent spindle rotation when
installing or removing accessories.
Switch handle mounting positions
1
2
3
007349
The switch handle can be rotated to either 90° left or
right to fit your work needs. First, unplug the tool. Press
the lock button and rotate the switch handle to left or
right fully. The switch handle will be locked in that
position.
CAUTION:
Always make sure that the switch handle is locked
in the desired position before operation.
Switch action
1
B
A
2
006734
All manuals and user guides at all-guides.com
To start the tool, simply pull the switch trigger (in the B
direction). Release the switch trigger to stop. For
1. Shaft lock
continuous operation, pull the switch trigger (in the B
direction) and then push in the lock lever (in the A
direction). To stop the tool from the locked position, pull
the switch trigger fully (in the B direction), then release it.
NOTE:
Models GA7040S, GA9040S begin to run slowly when
they are turned on. This soft start feature assures
smoother operation.
ASSEMBLY
1. Motor housing
2. Lock button
Installing side grip (handle)
3. Handle
006735
Screw the side grip securely on the position of the tool
as shown in the figure.
Installing or removing wheel guard
1. Switch trigger
2. Lock lever
7
CAUTION:
Before plugging in the tool, always check to see
that the switch trigger actuates properly and
returns to the "OFF" position when released.
Switch can be locked in "ON" position for ease of
operator comfort during extended use. Apply
caution when locking tool in "ON" position and
maintain firm grasp on tool.
CAUTION:
Always be sure that the tool is switched off and
unplugged before carrying out any work on the
tool.
CAUTION:
Always be sure that the side grip is installed
securely before operation.
CAUTION:
When
using
a
depressed
wheel/Multi-disc, flex wheel or wire wheel brush,
the wheel guard must be fitted on the tool so that
the closed side of the guard always points toward
the operator.
center
grinding

Publicidad

loading

Este manual también es adecuado para:

Ga7040sGa9030Ga9040s