Publicidad
Idiomas disponibles
Idiomas disponibles
Normal issues
1. There will be sound of flowing water when the refrigerant is running.
2. When humidity is high, the surface of the freezer appears frozen. Clean
with a soft cloth. This is normal and it does not indicate any issues or
problems.
3. When the freezer is working, the compressor is too hot. This is normal, do
not touch the compressor.
Use of wheels and foot screws
You can use the brakes on the wheels and/or the foot to stop the showcase
from moving. Remember to lift the brake and/or turn foot screws clockwise
when moving the showcase.
Replacement for internal upper light
1. Turn off the showcase, cut off the electricity.
2. Take out the trip bolt on the top board with screwdriver.
3. Take away the top board.
4. Take off the broken light.
5. Replace the light with the new one with same specification.
6. Turn on the showcase, check if the replaced light works properly.
7. Screw the top board.
Replacement for internal vertical light
1. Turn off the showcase, cut off the electricity.
2. Take out the protected board.
3. Unscrew the wire box and the trip bolt.
4. Take off the broken light upwards slightly.
5. Replace the light.
6. Fix the light, screw the wire box and the trip bolt.
7. Turn on the showcase, check if the replaced light works properly.
8. Fix the protected board.
25
Troubleshooting
In case your freezer is presenting any operating problems, check the probable
causes in the table below. You can solve common problems easily.
PROBLEM
CAUSE
Not cooling.
Power outage.
The power cord is not plug correctly.
Fuse broke off.
Smells inside the
Cool air exit is blocked.
unit.
Food with strong smell is not properly
packed.
Too much noise.
Unit is inclining or the base is too soft.
The wheels are not completely touching
the floor.
The cabinet is too close to the wall.
There are other objects directly touching
the unit.
The food too warm or hot and there is
Freezer does not
too much food inside.
stop operating.
Door is open too frequently or door is not
closed properly.
Refrigerator is directly under sunlight or
too close to heat source.
Not enough ventilation.
SOLUTION
Connect the power cord correctly to the
outlet or change the fuse.
Do not place any food near exit.
Pack the food in plastic bag to prevent
any strong smell from coming out.
Mount wood at the bottom.
Adjust the wheel screw.
Keep a certain distance from the wall.
Take the objects away.
Wait for food to cool down, after cooling
place the food inside and reduce the
quantity.
Close door tightly.
Keep as far as you can from heat
sources.
Keep the minimum specification for
ventilation.
Atención
If the operation does not improve,
contact the Frigidaire Authorized
Service.
26
Publicidad
