Publicidad
Idiomas disponibles
Idiomas disponibles
English
Tool Connect™ functions and mode adjustments
require battery to be installed.
Mode Selector (Fig. A, I)
WARNING: To reduce the risk of injury, remove
accessories from the tool chuck before using the
mode selector.
Your tool is equipped with a mode selector that allows 3
modes to be customized using the Tool Connect™ app.
Home settings are active when the home indicator
lit. The following 4 features can be customized. For more
information, refer to Table 1 below.
Once configured, pressing the mode selector button
the foot of the tool will cycle through the modes
If you are unsure of the current configuration, press the
14
mode selector button
to set the tool to the Home
15
setting (home indicator
is lit).
Fig. I
14
15
D
WALT Tool Connect™ (Fig. I)
e
WARNING: To reduce the risk of injury, remove
accessories from the tool chuck before any Tool
Connect™ interaction.
WARNING: When Bind-Up Control® is disabled
and the torque adjustment collar is in the drill or
hammerdrill position, the drill will not clutch. The drill
may stall if overloaded, causing a sudden twist.
NOTICE: Always check the tool configuration prior
to use. If you are unsure of the current configuration,
press the mode button
to the Home setting as described on the label and
this manual.
Table 1
Customizable Features
Worklight brightness
Worklight delay off
Maximum speed (RPM) in drill
mode
Bind-Up Control®
10
15
is
14
on
16
.
16
14
(Fig. I) to set the tool
Home*
MED
20 secs
Speed 1
450
Speed 2
1300
Speed 3
2000
Enabled
*Factory presets are not customizable in Home setting
This tool is capable of connecting with mobile devices that
support Bluetooth® Smart (or Bluetooth® 4.0) technology.
(To see if your mobile device is compatible, visit: http://
www.bluetooth.com/Pages/Bluetooth-Smart-Devices-List.
aspx)
D
WALT Tool Connect™ is an application for your smart
e
device (such as a smart phone or tablet) that connects the
device to your tool to allow you to configure specific tool
functions. Refer to Mode Selector.
nOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use
of such marks by D
WALT is under license. Other trademarks
e
and trade names are those of their respective owners.
nOTE: The Tool Connect™ App is governed by separate
terms and conditions available for viewing through the
mobile application.
Download the D
WALT Tool Connect™ application at:
e
•
Follow the instructions in the app to create your Tool
Connect™ account.
•
On the Home screen of the app, select "+ Tool" to begin
the process of adding your tool to the app.
•
To connect your tool with the D
app, at the appropriate screen, press the mode selector
14
button
for 3–5 seconds, then wait for the tool to
connect. The tool can only be connected to one Tool
Connect™ account at a time.
•
Once the tool has been connected, you can confirm that
you would like to register the product.
For more information on D
e
functionality and features, please call 1–800–4-D
(1–800–433–9258), visit www.D
the FAQ page and help screens located inside the
mobile application.
Coin Cell Battery
Bluetooth® capability is powered by one coin cell battery in
your tool, that when necessary, should be replaced by your
local D
WALT service center. Do not attempt to replace the
e
coin cell battery yourself.
WARNING: Danger of explosion if battery is
incorrectly replaced.
Factory Presets
Mode 1
Mode 2
OFF
MED
20 secs
20 secs
450
450
1300
1300
2000
2000
Enabled
Enabled
WALT Tool Connect™
e
WALT Tool Connect™
WALT
e
WALT.com or view
e
Mode 3
Customizable Range
HIGH
OFF-HIGH
20 minutes
0–20 minutes
450
140–450
1300
400–1300
2000
600–2000
Enabled
Disabled/Enabled
Publicidad
