Bestway 2622026 Manual De Instrucciones página 3

WARNING
READ AND FOLLOW ALL INSTRUCTIONS
WARNING-
TO REDUCE THE RISK OF INJURY, do
not permit children to use this product unless they are
closely supervised at all times.
CAUTION-
This product is for use with storable pools
only. Do not use with permanently-installed pools. A
storable pool is constructed so that it is capable of
being readily disassembled for storage and
reassembled to its original integrity. A
permanently-installed pool is constructed in or on the
ground or in a building such that it cannot be readily
disassembled for storage.
CAUTION-
Do not touch the panel surface when the
product is working or you may get hurt.
NOTE:
Do not sit, stand or jump on this product.
NOTE:
Weather conditions can affect the performance
and life span of your solar water heater.
NOTE:
This product must be set up on a flat and clean
location; the ground must be cleared of all objects and
debris including stones and twigs.
NOTE:
Grass or other vegetation under the product
will die and may cause odors and slime to develop,
therefore we recommend removing all grass from the
selected location. Avoid locating the item over of beside
areas prone to aggressive plant and weed species as
they may damage the item when they grow.
NOTE:
This product must be placed in direct sun light
to ensure proper performance.
NOTE:
Drawings for illustration purpose only. May not
reflect actual product. Not to scale.
SPECIFICATIONS
Surface 2.84 m
Length 2.37 m / 93 in
Width 1.2 m / 47 in
Max Pressure(Psi) 10
Material PVC
Channel System S-channel
Installation On Lawn/On Flat
50-100% of the swimming pool surface (Increase
Characteristic
swimming pool water temperatures by approximately
3-5 C (5-9
O
Ref.No. Description
1 Heat Panel
2 O-Ring (Φ24 mm)
3 Hose Adapter
4 Adapter Nut
5 Hose Clamps
6 Hose (Φ32 mm x 1000 m)
7 Adapter Cap
8 O-Ring (Φ56 mm)
/ 30.35 ft
2 2
F) Depending on the weather condition
O
QTY. Spare Part No.
1
2 P6005
2 P6618
2 P6615
2 P6124
1 P6176
2 P6540
4 P6029
To order spare parts for the Pool Solar Water
Heater, please provide us with part no. and
part name.
ASSEMBLY INSTRUCTIONS
1. Unplug the sand filter. Loosen the hose clamps on
the pool's inlet and outlet valves, replace the debris
screens with stopper plugs (or close the connection
valves) to stop water to flow.
2. Follow the below diagram instruction to assemble all
the parts properly;
NOTE:
Refer to the sand filter's owner's manual for
assembly.
3. Loosen the hose clamps on the pool's inlet and outlet
valves; replace the stopper plugs with debris screens
(or open the connection valves of the pool) to allow
water to flow.
4. Tighten the hose clamps, ensure no water is leaking
and every connection is securely fastened.
1
2
B
3
B
MAINTENANCE
CAUTION: YOU MUST ENSURE SAND FILTER IS
UNPLUGGED BEFORE ANY MAINTENANCE
BEGINS OR SEVERE RISK OF INJURY OR DEATH
EXISTS.
1) Unplug the sand filter.
2) Loosen all the hose clamps.
3) Remove debris screens from inside of pool. Replace
the debris screens with the stopper plugs in the pool's
inlet and outlet valves. (Or close the connection valves
A.)
4) Clean the panels with a garden hose carefully.
STORAGE
1) Unplug the filter pump or sand filter.
2) Follow the instructions as previously outline to stop
water flowing to the filter pump or sand filter.
3) Detach all hoses.
4) Dry all components thoroughly.
5) Roll all the panels.
6) Store the product in a dry warm location out of child's
reach.
3
B B
B B
6
B
B