Troubleshooting Guide; Disposal And Recycling; Technical Data; Repair Service - stayer BC800 Manual De Instrucciones

5. Maintenance and service instructions
5.1 Cleaning
- Remove the cover 3 by loosening the straps 2.
- Remove the filter 11 by pulling it.
- Remove the filter assistant 7 lifting a finger.
- Wash the filters with clean water and if necessary with mild
liquid detergent.
- Let dry the filters.
- Assemble the vacuum.
- Note that for the vacuum seal the closing lid 2 must match the
lid lock notches 12.
- You can also clean the filters with compressed air.
Do not use cleaning agents to clean the plastic
parts of the tool. A mild detergent on a damp cloth is
recommended. Water must never come into contact
with the tool.

5.2 Troubleshooting Guide

PROBLEM CAUSE
- Power cord not firmly
Motor does not plugged into outlet.
start - Outlet damaged.
- Cleaner not switched on.
- Clogged filters.
- Dust filter needs cleaning.
Suction power
(11 y 7)
is weaker
- Dust container (1) not in
position.
- Lid not closed.

5.3 Repair service

Our after-sales service responds to your questions conceming
maintenance and repair ofyour product as well as spare parts.
Exploded views and information on spare parts can also be
found under: info@grupostayer.com
Our customer consultants answer your questions conceming
best buy, application and adjustment of productsand accessories.
5.4 Warranty
Warranty card
lncluded in the documentation that accompanies this equipment,
you should find the warranty card. You should fill out the card
completely and retum to vendar with a copy of purchasing
receipt or invoice and you should receive a receipt.
Note: lf you cannot find the warranty card within the
documentation,youmust ask for it through your supplier.
The warranty is limited only to manufacturing defects and
expire if pieces have been removed or manipulated or repaired
otherthan themanufacturer.
ENGLISH
11
ACTION
- Plug unit firmly.
- Check the Outlet.
- Switch on the appliance.
- Clean the dust filter.
- Close the lid using
the fixings 2 and note
matching the notches of
the lid 12.
11

5.5 Disposal and recycling

The machine, accessories and packaging should be sorted for
environmental-friendly recycling.
OnlyforEC countries:
Do not dispose of power tools into household waste!
According the European Guideline 2002/96/EC for
Waste Electrical and Electronic Equipment and its
implementation into national right,power tools that
are no longer usable must be collected separately
and disposed of in an environmentally correct
manner.
Subject to change wlthout notlce.
6.Regulations

6.1 Technical Data

= Rated power input
= Capacity
= Aspiration
= Diameter of the tube
= Tube length
= Weight
L =Sound power level
WA
L =Sound pressurelevel
PA
=Vibration
The values givenarevalid for nominalvoltages [U]230/240
V-50/60 Hz - 110/120 V- 60Hz. For lower voltage and models
for specific countries, these values can vary.Please observe
the article number on the type plata of your machine.The
tradenamesoftheindividualmachines may vary.
NoiseNibration lnformation
Measuredsoundvalues determined according toEN 60745.
Typically the A-weighted noise levels of the product are:Sound
pressure level78 dB(A); Sound power level89 dB(A).Uncertainty
K=3dB.