Mc Haus Artic-30 Manual Del Usuario página 48

PANEL DE CONTROL
SWING FAN TIMER
swing low speed middle speed
wifi full water night
alarm mode
REMOTE CONTROL
94
SLEEP MODE
high speed timer "on"
automatic cooling fan
mode mode mode
Pressing this button will Used for automatic
switch the appliance on oscillation system.
or off.
Press this button to select the
different operating modes.
Used to set the room
temperature and timer.
This button is used to select
the fan speed in sequence.
Used to activate the To select/deselect the
automatic on/off.. mode of operation.
CONTROL PANEL OPERATIONS
Turn on the unit
- Plug in, then the unit beeps.
- Press the button
in automatic mode.
Select the operating mode
ON/OFF
- Press the button
timer "off"
Set the temperature
- The temperature can be adjusted within a range of 15ºC to 31ºC by 1ºC.
- Press or
dehumidifier
mode
The led unit displays the target temperature for 5 seconds and then displays the room temperature.
Select the fan speed
- Press the button
On/Off
- When you press the button
Swing
- Press this button
, then the unit turns on. The led displays the room temperature and operates
to select the desired mode shown below.
to increase or decrease the temperature by 1ºC by pressing once.
to select the desired mode as shown below
a second time, the unit will beep and turn off.
to set the swing.
95