Tripp-Lite DWF3780X Manual Del Propietário página 5

Assembly
2a
Mount on Wood Stud Wall
W-C
W-A
50mm 50mm
Find and mark the
exact location of
mounting holes
Drill pilot holes
Screw the assembled
wall plate onto the wall
• Make sure mounting screws are anchored into the center
of the studs. U se of a stud finder is highly recommended.
• Installers are responsible to provide hardware for other
types of mounting situations.
• Installers must verify the supporting surface will safely
support the combined load of the equipment and all
attached hardware and components.
5
(2.2") (2.2")
O 4.5mm O 4.5mm
(O 3/16") (O 3/16")
1
2
3
WARNING