Descargar Imprimir esta página

Publicidad

Enlaces rápidos

U P
C
®
Models/Modelos/Modèles
2778, 4778 & 5778
Series/Series/Seria
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:
1/8" (3.17mm)
For easy installation of your Delta
faucet you will need:
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care, and maintenance
information.
• To complete the deck and valve rough-in prior to
installing this trim kit.
Para instalación fácil de su llave Delta
usted necesitará:
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
• Para completar el borde y la instalación de
válvulas dentro de las paredes previa a la
instalación de la llave y sus accesorios.
Pour installer votre robinet Delta
facilement, vous devez:
• LIRE TOUTES les instructions avant de débuter;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien;
• Installez le corps du robinet et terminez le
pourtour du bain avant de poser les accessories
de finition.
3/32"
(2.38mm)
?
US. Pat. 3,645,493, 3,786,995, 4,523,604, 4,562,960, 4,593,430, 4,218,785, 4,577,653, 4,765,365
1
3/32" (2.38mm)
1/8" (3.17mm)
9/7/05
Rev. A

Publicidad

loading

Resumen de contenidos para Delta 2778 Serie

  • Página 1 • To READ ALL warnings, care, and maintenance information. • To complete the deck and valve rough-in prior to 1/8" (3.17mm) installing this trim kit. Para instalación fácil de su llave Delta usted necesitará: • LEER TODAS las instrucciones completamente 3/32" antes de empezar.
  • Página 2 MAKE ANY OTHER WARRANTY OF ANY KIND, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY. Delta will replace, FREE OF CHARGE, during the warranty period, any part or finish that proves defective in material and/or workmanship under normal installation, use & service. Replacement This warranty excludes all industrial, commercial &...
  • Página 3 Models / Modelos / Modèles 2778 & 5778 Model / Modelo / Modèle 4778 RP41884▲ (5778) RP41585▲ Spout Assembly RP41584▲ (2778) Ensamble del Tubo de Salida Spout Assembly Ensamble del Tubo de Salida RP18395 RP18395 Set Screw Set Screw Tornillo de Presión Tornillo de Presión Vis de Calage Vis de Calage...
  • Página 4 4778 RP40668 Diverter Assembly Ensamble del Desviador Dérivation Maintenance Model 4778 If faucet leaks from spout outlet–Shut off water supplies– If faucet does not divert water from the spout to the hand shower, check that Replace Seats and Springs (1). * the lift rod (1) is securely threaded into the diverter (2).
  • Página 5 2778 & 5778 4778 NOTE: The deck and valve rough-in must be finished before Screw bases (1) with gaskets (2) over end valves (3). OPTION: Use installing the trim kit. silicone under the gasket if deck is uneven. Install gasket (4), base (5) and spout (6) on the spout adapter (7).
  • Página 6 For Model 4778 Only Slide hose (1) through conical nut (2). Attach hose (1) to braided Install lift rod (1). Screw the lift rod until it drops down and metal hose (3) using gasket (4) and tighten. DO NOT install hand rotates freely.
  • Página 7 4778 Models 2778 and 5778 Install handles. Be sure glide ring (1) is properly seated in Remove spout tip and gasket (1). Turn faucet handles (2) all the way on. bottom of handle before installing. If either handle does not Turn on hot and cold water supplies and flush water lines for one minute.
  • Página 8 4778 4778 Pull hose (1) to its farthest extension and point it down into the Attach hand piece (1) to hose (2) with gasket (3) between tub. Pull the lift rod (2) up to the full on position and flush water connection.

Este manual también es adecuado para:

4778 serie5778 serieDet5778-lhp