GE ASW18 Serie Manual Del Propietario E Instrucciones De Instalación página 11

Window Installation Instructions
1 WINDOW REQUIREMENTS
• These instructions are for a standard
double-hung window. You will need to
modify them for other types of windows.
• The air conditioner can be installed
without the accordion panels if needed
to fit in a narrow window. See the
window opening dimensions below.
• All supporting parts must be secured
to firm wood, masonry or metal.
• The electrical outlet must be within
reach of the power cord.
" to 39"
28 1 ⁄
2
(With accordion panels)
24 1
(Without accordion panels)
STORM WINDOW REQUIREMENTS
2
A storm window frame will not allow the
air conditioner to tilt toward the outside,
and will keep it from draining properly.
To adjust for this, attach a piece of wood
to the stool.
WOOD PIECES–
WIDTH: 2"
LENGTH: Long enough to fit inside the
window frame.
THICKNESS: To determine the thickness,
place a piece of wood on the stool to
make it 1/2" higher than the top of the
storm window frame.
Attach securely with nails or screws
provided by the installer.
1/2" higher
than frame
Storm
window
frame
" min.
17 3 ⁄
8
" min.
⁄
2
Wood
Stool
REMOVE THE FRONT GRILLE
3
(IF ATTACHED)
A
Remove shipping tape, if present.
On models with a
raise-up inlet grille, lift
it and remove the
screw behind it (if
present) that holds the
grille in place.
On some models,
open the inlet
grille from the
sides and remove
it. Remove the
screw, if present.
11