Descargar Imprimir esta página

Makita XML09 Manual De Instrucciones página 15

Publicidad

Idiomas disponibles

Idiomas disponibles

NOTICE:
Do not wash the machine with high
pressure water.
4.
Check all nuts, bolts, knobs, screws, fasteners etc.
for tightness.
5.
Inspect moving parts for damage, breakage, and
wear. Damaged or missing parts should be repaired or
replaced.
6.
Store the mower in a safe place out of the reach of
children.
NOTICE:
Do not pour water to the area shown in
the figure. Pouring water to the motor unit may cause
a malfunction of the machine.
1
► 1. Area where water should not be poured
Carrying the mower
When carrying the mower, hold the front grip and rear
grip with two people as shown in the figure.
1
► 1. Front grip 2. Rear grip
All manuals and user guides at all-guides.com
2
Storing
Store mower indoors in a cool, dry and locked place.
Don't store the mower and charger in locations where
the temperature may reach or exceed 40 °C (104 °F).
Removing or installing the mower blade
WARNING:
The blade coasts for a few seconds
after releasing the switch. Do not start any opera-
tion until the blade comes to a complete stop.
WARNING:
Always remove the lock key and
battery cartridge when removing or installing the
blade. Failure to remove the lock key and battery
cartridge may cause a serious injury.
WARNING:
Always wear gloves when han-
dling the blade.
Removing the mower blade
1.
Put the mower on its side so that the mowing
height adjusting lever comes to the upper side.
2.
To lock the blade, insert the pin into a hole on the
mower body.
3.
Turn the bolt counterclockwise with box wrench 17.
3
► 1. Mower blade 2. Pin 3. Box wrench
4.
Remove the bolt, and then mower blade.
1
2
3
► 1. Blade support 2. Mower blade 3. Bolt
4. Protrusion
15 ENGLISH
2
1
4

Publicidad

loading