Jimmy JV12 Manual De Usuario página 5

Use of the product
Function description
Insert the plug into the socket, press on/off
button, the machine is in vacuuming + tapping
+ UV mode, all indicators light up. Press on/off
button again, the machine stops working(Fig 1).
Notice: for safety reasons, the UV light only works
within 3cm above object as well as less than 30
inclination degrees. Otherwise, the UV light will
automatically turn off.
Cleaning and maintenance
Dust cup cleaning
1.Turn off the machine and unplug the power
cord. Then press the release button and lift
upward (Fig 2).
2.Hold the dust cup and dust cup cover separately,
twist dust cup lid anticlockwise (Fig 3), remove
it from dust cup to clean (Fig 4).
3. Do Not tap the filter in reverse side in case of filter
clog(Fig 5).
4.Clean the cyclone metal filter with the attached mini
brush(Fig 6).
5.After cleaning dust cup, rotate cyclone(according to
the arrow in Fig 6), separate the dual cyclone cover,
dual cyclone upper cover and inner cyclone to clean
(Fig 7).
6.After cleaning, assemble parts in reverse order. Do
Not miss the filter, filter missing can cause product
failure.
Notice: use water or neutral reagents to clean dust cup
frequently. Make sure the filter and dust cup are frequently. Make sure the filter and dust cup are
completely dry before another use.
1
Indicator
2
Dust cup release
button
4
Dust cup lid
5
Filter
Dual cyclone upper
7
cover
Dual cyclone
cover
Inner cyclone
On/Off button
3
Filter
6
Mini Brush
8
Brushroll
cover knob
3