Publicidad
Idiomas disponibles
Idiomas disponibles
beFORe UsING yOUR APPlIANCe
Before using your Oster
instructions below:
1. Remove any stickers from the product.
2. DO NOT IMMERSE TEMPERATURE CONTROL PROBE IN WATER.
3. Clean and condition the ceramic non-stick surfaces:
a. Make sure the probe is not inserted into the unit; otherwise remove it from the
unit. Wash the cooking plate, drip pan and base with a soft sponge with hot,
soapy water. Rinse and dry them well.
b. Place the drip pan and cooking plate (with Grill side up) back in the base.
c. Set the temperature control to the off position "O" and insert the probe into the
unit. If temperature control probe is not completely inserted, abnormal heating
may occur, resulting in accident or damage.
d. To condition the cooking surface, plug the appliance into the appropriate
electrical outlet. Turn the temperature control knob clockwise choosing one of
the low temperature settings. The orange indicator light will illuminate. Allow the
unit to pre-heat until the orange ready light goes off indicating that the selected
cooking temperature has been reached.
e. Wipe a small amount of butter or margarine onto the cooking surface, spread
slightly and wipe away any excess.
f. Wait for the unit to cool, remove the temperature control probe and flip the
plate (this time the Griddle side should be up).
g. Repeat the steps (c) through (e) to condition the griddle cooking surface.
NOTE: When using the unit for the first time, you may notice a fine smoke haze
coming out from the unit. This is normal. It is due to the initial heating of internal
components.
Your Oster
Reversible Grill/ Griddle is now ready to use and it will not be necessary
®
to condition it again.
UsING yOUR APPlIANCe
1. Place the drip pan correctly in the base as illustrated below (see Figure 1).
WARNINg: To prevent personal injury or property damage, this drip pan must be
in place during cooking.
Reversible Grill/ Griddle for the first time, please follow the
®
en gl is h 4
Figure 1
Publicidad
