Eiko SEN5A-SZPR-WH Instrucciones De Instalación

INSTALLATION INSTRUCTIONS
SEN5A-SZPR-WH
Z10 Twist Lock PIR Sensor
O R D E R C O D E I T E M #
13342 SEN5A-SZPR-WH
COMPATIBLE WITH:
• EiKO Z10 Fixtures
• EiKO Z10 Adaptor: SENA-APZ-WH
• EiKO Z10 Stem Swivel Mount bracket: SENA-AZ-WH and SENA-AZ-BK
• TE 2343403-1 Zhaga Book18 Receptacle
IMPORTANT
FCC WARNING STATEMENT:
• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation.
INSTALLATION:
Align the sensor pins with the
1
compatible receptacle/adaptor
located on your fixture.
NOTES:
• Default Factory Settings: Sensitivity: 100% | Hold Time: 5 minutes | Daylight Sensor: Disabled | Dimming Level: 30% | Dimming Time: 60 minutes.
• Warm-up time is 40 seconds. After the sensor connects for the first time, the light will stay solid for 30 seconds, then dims and is ready for normal operation.
• For sensor reprogramming/commissioning, please see the SEN5A-ACT Remote Control Operation Guide.
1
V O LTA G E
12V-24V DC
©2023 EiKO Global, LLC. World Headquarters: 18000 W. 105
Head Office, Canada: 7900 Goreway Drive, Unit 8, Brampton, ON L6T 5W6 1.888.741.2673
M O U N T I N G H E I G H T D E T E C T I O N R A D I U S
Max. 40FT (12M) 0-20FT (0 to 6M)
Twist the sensor clockwise and lock it
2
in place. Installation is now complete.
Street, 3
th rd
Floor, Olathe, KS 66061 1.800.852.2217
eiko.com
Rev. 02/21/23