Publicidad
Idiomas disponibles
Idiomas disponibles
5. INSTALLATION AND USE
5.1 Use
MANUAL
COMMISSIONING
The device must be completely removed from its packaging. All guards must be completely removed.
Place the device on a solid, flat surface Never place the device on a flammable surface.
Do not install this device near open fires or other heating devices.
Put the eutectic plate in a freezer (-4°C or less) for about 3 to 6 hours before each use. (The plate stays cold
for about 4 to 6 hours at an ambient temperature of about 25°C).
6. CLEANING AND MAINTENANCE
6.1 Daily maintenance
Clean the device with warm water and a clean cloth after each use.
After cleaning, use a soft, dry cloth to polish and dry the device. All parts must be dried.
Store the device in a dry place.
REMARK
Waste from used appliances: all used appliances must, when disposed of, comply with the regulations in
force in their country*. It is imperative to make the device unusable before disposal by removing the power
supply cable.
* in terms of ecology and recycling
Eutectic plate
Base
EN
Publicidad
