11. Set the Volume of Soap Dispensed
IMPORTANT! Four options are available to control the amount of dispensed soap.
The desired option is set by moving the volume switches to an up or down position.
NOTE: The dispenser comes equipped with a 1600 ml reservoir, and the soap counter
is set to the 1600 ml position. If an 800 ml reservoir is used, move the soap counter to
the 800 ml position.
Lift the rubber cover to access the control switches.
Set the position of the two volume switches for the desired volume of soap
dispensed. Refer to the settings shown above.
Verify that the soap counter switch is set to the correct position for your reservoir
size.
Refer to the chart below for the approximate number of dispenses available based
on the volume setting and a full 800 ml or 1600 ml reservoir.
1419080-2-A
Rubber
Cover
A
B
0.6 ml
1.0 ml
18
Volume
Switches
Up
C
1.6 ml
Soap
Counter
800 ml
1600 ml
Down
D
2.0 ml
Kohler Co.