Lincar Alice 480N Manual Del Usuario página 26

To guarantee a perfect combustion , it's
•
necessary to keep the combustible in a
very dry and protected area.
The wood – output depends on its
•
relative humidity in %. (see the schedule
enclosed ).
2.3 STARTING
The appliance should set at work only after having completed the following operations:
•
complete assembling, connection to exhaust fumes duct and to the heating plant. A new
appliance needs to complete the drying process of the paint. During the first heatings you
can notice the following situations:
- During the first ignitions the appliance may exhale bad smell. We suggest a good
aeration of the room till bad smells have been eliminated.
- The complete drying process will be obtained after some heating operations
The equipment is a wood stove with a functioning as Normative EN 13240.
•
Thanks to combustion chamber structure, the equipment has an high calorific efficiency.
WOOD LOADING
The stove should be loaded manually during the functioning.
•
The loading of combustible should be done when the flame is minimum to avoid
•
combustion products or fumes outlet from the fire door.
To open the fire door, employ the fixture enclosed.
•
STARTING AND FUNCTIONNING
N.B. For starting never use alcool, fuel or other liquid combustibles
In case of starting during particular cold days or with low pressure, it's advisable to heat
•
the chimney burning papers in stove.
For wood burning loads please read the chapter "Technical Data " and follow the
•
instructions indicated for quantities.
IT IT IT IT- - - - GB GB- - - - FR FR- - - - ES ES mod. 470-480LZ-490LZ-480N-490N
GB GB FR FR ES ES
26/64