Truper TALI-20N Instructivo página 18

Battery Level
Indicator
Battery
charger
Battery charge
1. Plug in the charger in a 120 V~power outlet (Green
charging indicator light will turn on).
2. Insert the battery into the charger sliding it as shown in
the figure. The green light will turn off and the red light
should turn on indicating the charge has initiated.
• When the battery is completely charged, the green light
will be on and the red light will be off.
• Disconnect the charger from the power once the charge
is completed.
• If the red light is blinking it signals a defective battery.
Replace with a new one.
• In case the green light is blinking it signal the
temperature in the battery is lower to 32 °F or higher than
113 °F. Wait until the battery temperature is in the
adequate level to be able to charge it.
6
ENGLISH
Lithium Ion
Battery (2)
Battery
Charge
connection teeth
indicator
Parts
Keyless Torque
chuck regulator
Double
tip
Switch
Battery
release
button
Lithium Ion
Battery (2)
Start Up
2
Speed
selector
LED
light
Belt clip
1
Rotation direction
button and
switch lock
Handle