Auto Shut-Off - T3 LUCEA 76520 Manual Del Usuario

MAINTENANCE
6
INSTRUCTIONS
1. Your appliance is virtually
maintenance free. It contains no user
serviceable parts, and no lubrication
is needed.
2. Keep heated surfaces clean and free
of dust, dirt & hairspray.
3. If cleaning becomes necessary,
disconnect the appliance from the
power source and let it cool. Wipe
the exterior with a damp cloth.
4. If any malfunction occurs, unplug the
appliance, allow it to cool and return
it to a service center to repair.
5. Never wrap the cord around the
appliance since this will cause the
cord to wear prematurely and break.
If the cord becomes twisted, untwist
it prior to use.
6. Handle the cord carefully for longer
life and do not put any stress on
the cord where it enters the handle.
Avoid jerking, twisting or straining
especially at the plug connections.
It could cause the cord to fray and
possibly break.
7. Do not attempt to repair the
appliance yourself.
When not in use, your styling iron
should be disconnected and stored
in a safe, dry location, out of reach of
children. Do not wrap the cord around
the styling iron. Allow the cord to hang
or lie loose and straight at the point of
entry into the styling iron.
STORAGE
OPERATING
INSTRUCTIONS
LUCEA
This appliance is intended for
household use. Use on Alternating
Current (60/50Hz) only.
This appliance has a polarized plug
(one blade is wider than the other).
As a safety feature, this plug will fit in
a polarized outlet only one way. If the
plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician. Do not
attempt to defeat this safety feature.

AUTO SHUT-OFF

After approximately one hour, the unit
will automatically shut itself off. To
reactivate the unit, press the Power &
Temperature Button.
AUTO WORLD VOLTAGE
This appliance contains a special
electronic circuit that automatically
converts it for worldwide usage - from
120VAC 60 Hz to 240VAC 50 Hz. Just
plug it into the local power outlet
and use it as normal; the styler will
automatically adjust to the local
current. You may need a plug
adapter to allow the plug to fit into
the local outlets.
Note: Tool heat up time may vary
based on country and voltage.
7