Publicidad
Idiomas disponibles
Idiomas disponibles
Problem
Possible cause
The motor runs
The chain is
and the chain ro-
blunt.
tates, but the
chain does not
The chain is in
cut.
the incorrect di-
rection.
The chain is tight
or loose.
The machine
does not start.
The machine
and battery are
not connected
correctly.
The battery level
is low.
The lock out but-
ton and the trig-
ger are not push-
ed at the same
time.
The battery is
too hot or too
cold.
The motor runs,
The machine is
but the chain
in the protection
does not cut cor-
mode to protect
rectly, or the mo-
the PCB.
tor stops after
around 3 sec-
onds.
The battery is
not charged.
The chain is not
lubricated.
Incorrect battery
storage tempera-
ture
English
8
Solution
Sharpen or re-
Voltage
place the saw
chain.
No load speed
Turn the chain
Guide bar length
loop to the other
Chain stop
direction.
Chain oil capacity
Adjust the chain
tension.
Weight (without battery
pack)
Make sure that
the battery re-
Measured sound pres-
lease button
sure level
clicks when you
Guaranteed sound power
install the battery
level
pack.
Vibration
Charge the bat-
tery pack.
Chain
1. Push the
lock-out but-
Guide bar
ton and hold
it.
2. Push the trig-
Battery model
ger to start
the machine.
Charger model
Refer to battery
and charger
manual.
9
Release the trig-
ger and start the
(The full warranty terms and conditions can be found on
machine again.
Greenworks website )
Do not force the
The Greenworks warranty is 3 years on the product,
machine to cut.
and 2 years on batteries (consumer/private usage)
Charge the bat-
from the date of purchase. This warranty covers
tery. Refer to the
manufacturing faults. A faulty product under warranty
battery and
might be either repaired or replaced. A unit that has
charger manual
been misused or used in other ways then described
for correct charg-
in the owner's manual might be rejected for warranty.
ing procedures.
Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not
Lubricate the
affected by any additional warranty offered by a dealer
chain to de-
or retailer.
crease the fric-
tion. Do not let
A faulty product must be returned to the point of
the guide bar
purchase in order to claim for warranty, together with
and the chain
the proof of purchase (receipt).
operate without
sufficient lubri-
10
cant.
Cool the battery
Name and address of the manufacturer:
pack until it de-
creases to the
ambient temper-
ature.
9
TECHNICAL DATA
40 V DC
4.2 m/s
305 mm
< 2 s
200 ml
2.6 kg
L
= 79.3 dB(A), K
pA
dB(A)
L
= 96 dB(A)
wA.d
<2.5 m/s
90PX045X/
CL14345/90X-45E
124MLEA041/
M1431245-1041/
ES124MLEA041
G40B2/G40B25/G40B4
and other BAF series
G40C and other CAF ser-
ies
WARRANTY
EC DECLARATION OF
CONFORMITY
EN
= 3
pA
2
2
, K = 1.5 m/s
Publicidad
