Descargar Imprimir esta página

Zbeamz LED FlatPAR-154 x10mm RGBW Manual De Instrucciones página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

MANUAL RGBW MODE
Switch the unit on and press the MENU button until "RXXX" is displayed you are in Red dimming mode. Press the UP and DOWN
buttons to adjust intensity of the RED LEDs and confirm setting by pressing the ENTER button. When "G.XXX" is displayed you
are in Green dimming mode, "B.XXX" is Blue mode, "H.XXX" is White mode.
AUTO / SOUND MODE
Auto Mode: There are 3 types of Auto Modes to choose from; Color Strobe, Color Dimmer Color Change, and both modes running
together. The running speed is adjustable in all 3 modes.
-
Single Color Strobe (1Exx)
Single color strobe (running) effect , 1E00 = fast ~1E20 = slow
-
Strobe (2Exx)
Strobe effect all LEDs strobe 2E00 = fast ~ 2E20 = slow
-
Dimmer (1FXX – 7FXX)
1F=RED, 2F=GREEN, 3F=BLUE, 4F=WHITE, 5F= RED/WHITE, 6F=GREEN/BLUE/WHITE,
7F=RED/GREEN/BLUE/WHITE dimming 0-100%
-
Color Change (1JXX)
Change color from RED to GREEN to BLUE to WHITE to RED etc. XX = speed
-
Color Fade (2JXX)
Fade color from RED to GREEN to BLUE to WHITE to RED etc. XX = speed
-
Sound Mode (1UXX)
1U = Single color, remain on last position when no sound
2U = Multi color LEDs go out when a while no sound
3U = LEDs remain on last position when no sound
4U = Random color LEDs go out when a while no sound
www.beamzlighting.com

Publicidad

loading

Este manual también es adecuado para:

151.224