Manuales relacionados para Truper PRE-1/3
Resumen de contenidos para Truper PRE-1/3
- Página 1 Manual Water Pressure 1/3 Hp Booster Pump Power Applies for: Model Code PRE-1/3 14637 PRE-1/3 Read this manual thoroughly CAUTION before using the tool.
- Página 2 Parts using the tool. Installation Keep this manual for future references. Start Up The illustrations in this manual are for reference Maintenance only. They might be different from the real tool. Troubleshooting Notes Authorized Service Centers Warranty Policy PRE-1/3 ENGLISH...
- Página 3 Technical Data PRE-1/3 Code 14637 Description Water Pressure Booster Pump Voltage 127 V Frequency 60 Hz Current Speed 3 600 RPM Power 1/3 Hp Inlet and Outlet Diameter 3/4 NPT Maximum Height/Maximum Value Minimum Inlet Pressure 0,72 PSI 39,3 ft...
- Página 4 General Power Tools Safety Warnings WARNING! Read carefully all safety warnings and instructions listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references.
- Página 5 Safety Warnings for Water Pressure Pumps WARNING • The automatic pressure pump is built with a noiseless • Do not allow the pump’s electric parts power motor totally coated with rotating parts generating be in contact with water. pressure in domestic clean water pipes. The pump doesn´t •...
- Página 6 Parts Pressure Flow Water Sensor Outlet Power Flow Cord Sensor Selecting Selecting Water Direction Indicator Remote Selector Purge Screw Purge Screw Water Inlet Remote Selector Reducing Nut from 1NPT to 3/4 NPT Installation CAUTION CAUTION • When installing the pump do not •...
- Página 7 Installation • Use threads sealing tape in all the connections (A). • Screw the reducing nut (B) to the inlet and outlet pipes. • Keep open a few seconds the closing valves (C) to clean and remove any particle from the inlet and outlet connections before installing the pump.
- Página 8 Installation Air Purging • For the pump to run correctly after being installed or after maintenance, discharge the air from inside the pump before starting it. • Open the water faucet after installing the pump (see page 7). • Set a screwdriver tip in the purge screw slot. •...
- Página 9 Maintenance Cleaning and Care Repairs • Inspect regularly all the mounting screws and double • Repairs to the equipment shall only be carried out in a check they are correctly tightened. If any of the screws is Authorized Service Center loose, tighten immediately.
- Página 10 Notes ENGLISH...
- Página 11 Authorized Service Centers In the event of any problem contacting a Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 01(800) 690-6990 or 01 (800) 018-7873 to get information about the nearest Authorized Service Center.
- Página 12 . For questions or comments, call 01-800-690-6990. Imported by: Truper, S.A. de C.V. Parque Industrial #1, Jilotepec, Edo. de Méx., Méx. C.P. 54240. Made in China. Stamp of the business: Delivery date: www.truper.com...