Publicidad
Idiomas disponibles
Idiomas disponibles
EnglisH
12
2
Let the shaver run until it stops, undo the two
screws in the hair chamber and remove it.
3
Undo the two screws at the back of the shaver
and remove the back panel of the housing.
4
Remove the side panels by pulling them off the
sealed power unit.
5
Undo the three screws in the sealed power
unit.
6
Remove the back panel of the sealed power
unit by means of a screwdriver.
7
Remove the battery.
Be careful, the battery strips are very sharp.
Do not connect the shaver to the mains again after
the battery has been removed.
Publicidad
